Important!
This replacement procedure can be used for:
FIAT STILO Multi Wagon (192) 1.6 16V, FIAT STILO Multi Wagon (192) 1.8 16V, FIAT STILO Multi Wagon (192) 1.9 JTD, FIAT STILO Multi Wagon (192) 1.9 JTD, FIAT STILO Multi Wagon (192) 1.9 JTD, FIAT STILO Multi Wagon (192) 1.4 16V, FIAT STILO Multi Wagon (192) 1.9 D Multijet, FIAT STILO Multi Wagon (192) 1.9 D Multijet (192DXT1B), FIAT STILO Multi Wagon (192) 1.9 D Multijet, FIAT STILO Multi Wagon (192) 1.9 JTD, FIAT STILO Multi Wagon (192) 1.9 D, FIAT STILO Multi Wagon (192) 1.6 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for STILO Multi Wagon (192) and other FIAT models
Tools
Replacement: shock absorbers – FIAT STILO Multi Wagon (192). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #17
Drive socket # 19
Wheel impact socket #17
Torque wrench
Tap wrench
Locking pliers
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – FIAT STILO Multi Wagon (192). AUTODOC experts recommend:
  • Both shock struts of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock struts of the rear suspension.
  • Please note: all work on the car – FIAT STILO Multi Wagon (192) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the boot lid.
    Step 2
    How to change Shock Absorber on Fiat Stilo Estate 2003 - free PDF and video manuals
    Remove the mount cap from the shock absorber upper fastener.
  2. Step 3
    How to replace FIAT STILO Multi Wagon (192) 1.9 JTD 2004 Shock Absorber - step-by-step manuals and video guides
    Loosen the upper fastener of the shock absorber. Use a combination spanner #17. Use locking pliers.
  3. Step 4
    Fiat Stilo Estate 1.9 D Multijet 2005 Shock Absorber replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 5
    Changing Shock Absorber on FIAT STILO Multi Wagon (192) 1.8 16V 2006 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  5. Step 6
    Raise the rear of the car and secure on supports.
    Step 7
    How to remove FIAT STILO 1.4 16V 2007 Shock Absorber - online easy-to-follow instructions
    Unscrew the wheel bolts.
    Replacement: shock absorbers – FIAT STILO Multi Wagon (192). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  6. Step 8
    How to replace Shock Absorber on FIAT STILO Multi Wagon (192) 2008: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 9
    How hard is it to do yourself: Shock Absorber replacement on Fiat Stilo Estate 1.9 JTD 2003 - download illustrated guide
    Support the rear suspension beam. Use a hydraulic transmission jack.
  8. Step 10
    Need to know how to renew Shock Absorber on FIAT STILO 2004? This free workshop manual will help you to do it yourself
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Shock Absorber on Fiat Stilo Estate 2005 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the lower fastener of the shock absorber. Use a drive socket #19. Use a tap wrench.
  10. Step 12
    FIAT STILO 1.6 16V Shock Absorber replacement: online guides and video tutorials
    Unscrew the upper fastener of the shock absorber.
  11. Step 13
    Replacing Shock Absorber on Fiat Stilo Estate 2007 1.9 JTD by yourself
    Remove the fastening bolt. Use a drive socket #19.
  12. Step 14
    STILO Multi Wagon (192) 1.4 16V 2008 Shock Absorber DIY replacement workshop manual
    Remove the shock absorber.
  13. Step 15
    Remove the shock absorber dust cap and the bump stop.
    Replacement: shock absorbers – FIAT STILO Multi Wagon (192). Tip:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary. Before installing a new shock absorber you should pump it manually 3-5 times.
    Step 16
    Install the dust sleeve and the bump stop on the new shock absorber.
    Step 17
    How to change Shock Absorber on FIAT STILO Multi Wagon (192) 2003 - tips and tricks
    Place the shock absorber in the wheel arch and fasten it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Stilo Multi Wagon (192) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT STILO Multi Wagon (192) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT STILO Multi Wagon (192) Shock Absorber replacement - online guide
Tips & tricks for your FIAT STILO Multi Wagon (192)
View more
  • How to change Shocks on FIAT STILO Multi Wagon (192) 1.6 16V - replacement tricks
    Checking the starter without removing it | AUTODOC tips
  • Changing Shock absorbers Fiat Stilo Estate 1.9 JTD - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - FIAT STILO Multi Wagon (192) 1.9 D Multijet Struts replacement guide
    How to Make a DIY Foam Sprayer | AUTODOC tips
  • Replace Struts and shocks on Fiat Stilo Estate - free video tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC