Disclaimer
How to change rear shock absorbers on FIAT Doblo I Estate (119, 223) – replacement guide
downloads:
2
Views:
27
Important!
This replacement procedure can be used for:
FIAT Doblo Estate (119_, 223_) 1.2 (223AXA1A), FIAT Doblo Estate (119_, 223_) 1.9 D (223AXB1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD (223AXE1A), FIAT Doblo Estate (119_, 223_) 1.6 16V (223AXD1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD, FIAT Doblo Estate (119_, 223_) 1.3 D Multijet, FIAT Doblo Estate (119_, 223_) 1.6 Natural Power … View more
The steps may slightly vary depending on the car design.
FIAT Doblo Estate (119_, 223_) 1.2 (223AXA1A), FIAT Doblo Estate (119_, 223_) 1.9 D (223AXB1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD (223AXE1A), FIAT Doblo Estate (119_, 223_) 1.6 16V (223AXD1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD, FIAT Doblo Estate (119_, 223_) 1.3 D Multijet, FIAT Doblo Estate (119_, 223_) 1.6 Natural Power … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for Doblo Estate (119_, 223_) and other FIAT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #21
Combination spanner #22
Drive socket # 16
Drive socket # 18
Drive socket # 21
Wheel impact socket #17
Torque wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – FIAT DOBLO (119). Tip from AUTODOC experts:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All work should be done with the engine stopped.
Replacement: shock absorbers – FIAT DOBLO (119). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: shock absorbers – FIAT DOBLO (119). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 8
Unscrew the upper fastener of the shock absorber. Use a drive socket #18. Use a tap wrench. - Step 9
Unscrew the lower fastener of the shock absorber. Use a drive socket #21. Use a tap wrench.Replacement: shock absorbers – FIAT DOBLO (119). Tip:To avoid injuries, hold the shock absorber when undoing the fastening bolts. - Step 10
Remove the fastening bolt. - Step 11
Remove the shock absorber.Replacement: shock absorbers – FIAT DOBLO (119). Professionals recommend:Before installing a new shock absorber you should pump it manually 3-5 times. - Step 12
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray. - Step 13
Place the shock absorber in the wheel arch and fasten it.AUTODOC recommends:Important! Hold the shock absorber while screwing in the fastening bolts. FIAT DOBLO (119) - Step 14
Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Estate (119, 223) model
Popular maintenance tutorials for FIAT Doblo 119
Complete guides for changing the Shock absorbers on different FIAT DOBLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT Doblo Estate (119_, 223_)
View more
When, why, and how to change engine oil | AUTODOC tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Top 7 signs of a bad starter
Most commonly replaced car parts on FIAT DOBLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























