Disclaimer
How to change serpentine belt on FIAT Doblo I Estate (119, 223) – replacement guide
downloads:
7
Views:
179
Recommended replacement interval for the part category Serpentine belt : 5 year / 20000 km
Important!
This replacement procedure can be used for:
FIAT Doblo Estate (119_, 223_) 1.3 JTD 16V, FIAT Doblo Estate (119_, 223_) 1.3 JTD, FIAT Doblo Estate (119_, 223_) 1.3 D Multijet … View more
The steps may slightly vary depending on the car design.
FIAT Doblo Estate (119_, 223_) 1.3 JTD 16V, FIAT Doblo Estate (119_, 223_) 1.3 JTD, FIAT Doblo Estate (119_, 223_) 1.3 D Multijet … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Doblo Estate (119_, 223_) and other FIAT models
Alternative products

Wire brush
Copper grease
Drive socket # 15
Drive socket # E18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
Replacement: serpentine belt – FIAT DOBLO (119). Tip from AUTODOC experts:
- All work should be done with the engine stopped.
Replacement: serpentine belt – FIAT DOBLO (119). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT DOBLO (119) - Step 5
Remove the wheel. - Step 6
Pry up the hydraulic power steering belt. Use a crowbar. Turn the crankshaft pulley. Use a drive socket #E18. Use a ratchet wrench. - Step 7
Remove the hydraulic power steering belt. - Step 8
Clean the tensioner pulley of the V-ribbed belt. Use a wire brush. - Step 9
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #15. Use a ratchet wrench. - Step 10
Remove the V-ribbed belt. - Step 11Return the tensioner pulley to its initial position.Replacement: serpentine belt – FIAT DOBLO (119). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 12
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Estate (119, 223) model
Popular maintenance tutorials for FIAT Doblo 119
Complete guides for changing the Alternator belt on different FIAT DOBLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT Doblo Estate (119_, 223_)
View more
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
What to do if your check engine light is on | AUTODOC tips
Top 5 reasons why the suspension knocks | AUTODOC tips
DIY rear axle restoration | Drivetrain restoration – Part 2
Most commonly replaced car parts on FIAT DOBLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















