Important!
This replacement procedure can be used for:
CITROËN BERLINGO (B9) 1.6 HDi 90, CITROËN BERLINGO (B9) 1.6, CITROËN BERLINGO (B9) 1.6, CITROËN BERLINGO (B9) 1.6 HDi 75 16V, CITROËN BERLINGO (B9) 1.6 HDi 90, CITROËN BERLINGO (B9) 1.6 HDi 110, CITROËN BERLINGO (B9) 1.6 VTi 120, CITROËN BERLINGO (B9) 1.6 VTi 95, CITROËN BERLINGO (B9) 1.6 HDi 110, CITROËN BERLINGO (B9) 1.6 HDi 115, CITROËN BERLINGO (B9) 1.6 HDi 75 / BlueHDi 75, CITROËN BERLINGO (B9) 1.6 HDi 90 4x4, CITROËN BERLINGO (B9) 1.6 HDi 115 4x4, CITROËN BERLINGO (B9) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for BERLINGO (B9) and other CITROËN models
Tools
Replacement: shock absorbers – CITROËN BERLINGO (B9). Tools you might need:
Wire brush
WD-40 spray
Ceramic grease
Copper grease
Torque wrench
Combination spanner #24
Drive socket # 24
Wheel impact socket #19
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – CITROËN BERLINGO (B9). Tip from AUTODOC:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – CITROËN BERLINGO (B9) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Shock Absorber on CITROËN BERLINGO (B9) 2008 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    Raise the car.
    Replacement: shock absorbers – CITROËN BERLINGO (B9). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace CITROËN BERLINGO (B9) 1.6 HDi 90 2009 Shock Absorber - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN BERLINGO (B9)
  3. Step 5
    CITROËN BERLINGO (B9) 1.6 HDi 110 2010 Shock Absorber replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Shock Absorber on CITROËN BERLINGO (B9) 1.6 BlueHDi 100 2011 by yourself
    Support the rear suspension beam. Use a hydraulic transmission jack.
  5. Step 7
    How to remove CITROËN BERLINGO 1.6 VTi 120 2012 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Shock Absorber on CITROËN BERLINGO (B9) 2013: download PDF manuals and video instructions
    Unscrew the upper fastener of the shock absorber. Use a drive socket #24. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Shock Absorber replacement on CITROËN BERLINGO (B9) 1.6 2014 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #24. Use a drive socket #24. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Shock Absorber on CITROËN BERLINGO 2015? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 11
    Changing of Shock Absorber on CITROËN BERLINGO (B9) 2016 won't be an issue if you follow this illustrated step-by-step guide
    Remove the shock absorber.
  10. Step 12
    CITROËN BERLINGO 1.6 HDi 110 Shock Absorber replacement: online guides and video tutorials
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Shock Absorber on CITROËN BERLINGO (B9) 2018 1.6 HDi 90 by yourself
    Treat the shock absorber mounting seats. Use copper grease.
  12. Step 14
    BERLINGO (B9) 1.6 VTi 120 2019 Shock Absorber DIY replacement workshop manual
    Place the shock absorber in the wheel arch and fasten it.
    Replacement: shock absorbers – CITROËN BERLINGO (B9). Tip from AUTODOC:
    Before installing a new shock absorber you should pump it manually 3-5 times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo II (B9) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN BERLINGO (B9) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN BERLINGO (B9) Shock Absorber replacement - online guide
Tips & tricks for your CITROËN BERLINGO (B9)
View more
  • How to change Shocks on CITROËN BERLINGO (B9) 1.6 HDi 75 16V - replacement tricks
    5 mistakes made when washing the engine | AUTODOC tips
  • Changing Shock absorbers CITROËN BERLINGO (B9) 1.6 HDi 90 - Replacement Tips
    How to fix your car with AUTODOC CLUB
  • Maintenance Hacks - CITROËN BERLINGO (B9) 1.6 HDi 110 Struts replacement guide
    How to paint a car with a spray can | AUTODOC tips
  • Replace Struts and shocks on CITROËN BERLINGO (B9) - free video tips
    How to remove rust | AUTODOC tips