Disclaimer
How to change rear shock absorbers on CITROËN Berlingo / Berlingo First (MF, GJK, GFK) – replacement guide
downloads:
0
Views:
10
Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 i (MFKFX, MFKFW, GJKFWB, GJKFWC, GFKFWC), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D (MFDJY), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.1 i (MFHDZ, MFHFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 i (MFLFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D (MFWJZ), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 2.0 HDI, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 D (MFA9A), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 i 4WD (MFLFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D 4WD (MFWJZ), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) electrique, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 16V (MFNFU), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 i bivalent (MFKFW), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 bivalent, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 HDI (MF9HW, GJ9HWC, GF9HWC, GN9HWC), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 HDI, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 16V (MFNFU), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) Electric … View more
The steps may slightly vary depending on the car design.
CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 i (MFKFX, MFKFW, GJKFWB, GJKFWC, GFKFWC), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D (MFDJY), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.1 i (MFHDZ, MFHFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 i (MFLFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D (MFWJZ), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 2.0 HDI, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 D (MFA9A), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.8 i 4WD (MFLFX), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.9 D 4WD (MFWJZ), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) electrique, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 16V (MFNFU), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 i bivalent (MFKFW), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4 bivalent, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 HDI (MF9HW, GJ9HWC, GF9HWC, GN9HWC), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 HDI, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.6 16V (MFNFU), CITROËN Berlingo / Berlingo First (MF, GJK, GFK) 1.4, CITROËN Berlingo / Berlingo First (MF, GJK, GFK) Electric … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for Berlingo / Berlingo First (MF, GJK, GFK) and other CITROËN models
Alternative products

Wire brush
WD-40 spray
Ceramic grease
Copper grease
Torque wrench
Combination spanner #24
Drive socket # 24
Wheel impact socket #19
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – CITROËN BERLINGO (MF). Tip from AUTODOC:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- Please note: all work on the car – CITROËN BERLINGO (MF) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the car.Replacement: shock absorbers – CITROËN BERLINGO (MF). Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN BERLINGO (MF) - Step 5
Remove the wheel. - Step 6
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 7
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the upper fastener of the shock absorber. Use a drive socket #24. Use a ratchet wrench. - Step 9
Unscrew the lower fastener of the shock absorber. Use a combination spanner #24. Use a drive socket #24. Use a ratchet wrench. - Step 10
Remove the fastening bolt. - Step 11
Remove the shock absorber. - Step 12
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray. - Step 13
Treat the shock absorber mounting seats. Use copper grease. - Step 14
Place the shock absorber in the wheel arch and fasten it.Replacement: shock absorbers – CITROËN BERLINGO (MF). Tip from AUTODOC:Before installing a new shock absorber you should pump it manually 3-5 times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I (MF, GJK, GFK) model
Popular maintenance tutorials for Citroen Berlingo MF
Complete guides for changing the Shock absorbers on different CITROËN BERLINGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN Berlingo / Berlingo First (MF, GJK, GFK)
View more
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
5 causes of turbocharger failure and how to avoid them
Why Checking Your Oil is Crucial for Engine Performance
CHECK ENGINE light turned on – step-by-step guide on what to do
Most commonly replaced car parts on CITROËN BERLINGO
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























