Disclaimer
How to change rear lower arm on MERCEDES-BENZ E-Class Coupe (C124) – replacement guide
downloads:
3
Views:
17
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG (124.052), MERCEDES-BENZ E-Class Coupe (C124) E 320 (124.052), MERCEDES-BENZ E-Class Coupe (C124) E 220 (124.042), MERCEDES-BENZ E-Class Coupe (C124) E 200 (124.040) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG (124.052), MERCEDES-BENZ E-Class Coupe (C124) E 320 (124.052), MERCEDES-BENZ E-Class Coupe (C124) E 220 (124.042), MERCEDES-BENZ E-Class Coupe (C124) E 200 (124.040) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for E-Class Coupe (C124) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Impact socket №19
Torx bit T20
XZN socket bit # M10
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Ball joint puller
Hydraulic transmission jack
Wheel chock
Replacement: rear lower arm – MERCEDES-BENZ E-CLASS Coupe (C124). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- Please note: all work on the car – MERCEDES-BENZ E-CLASS Coupe (C124) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Coupe (C124) - Step 5
Remove the wheel. - Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Step 7
Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #17. - Step 8
Unscrew the rear fastener connecting the control arm to the subframe. Use XZN #M10. Use a drive socket #19. Use a ratchet wrench. - Step 9
Remove the rear fastener of the control arm. Use a hammer. - Step 10
Detach the ABS sensor wiring from the suspension control arm. - Step 11
Remove the arm. Use a ball joint puller. - Step 12Clean the fastener of the ABS sensor bracket. Use a wire brush. Use WD-40 spray.Step 13
Unscrew the bracket fastening to the arm. Use Torx T20. Use a ratchet wrench. - Step 14Remove the bracket from the arm.Step 15
Install the bracket onto the new arm. - Step 16
Tighten the bracket fastening to the arm. Use Torx T20. Use a ratchet wrench. - Step 17
Install a new suspension arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Coupe (C124) model
Popular maintenance tutorials for Mercedes C124
Complete guides for changing the Control arm on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Coupe (C124)
View more
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Petrol or diesel: The engine showdown! | AUTODOC
How to prevent car windows from fogging up | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























