How to carry out replacement: Inner Tie Rod E 200 2.0 (124.040) Mercedes C124
Disclaimer
Change Mercedes C124 E 200 2.0 (124.040) Inner Tie Rod yourself – manuals and video tutorials

How to change inner tie rod on MERCEDES-BENZ E-Class Coupe (C124) – replacement guide

downloads: 0
Views: 6
Download your free tutorial and fix MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG 3.6 (124.052) problems yourself Download for free 2.33 MB Inner Tie Rod for Mercedes C124 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Coupe (C124) E 200 (124.040), MERCEDES-BENZ E-Class Coupe (C124) E 220 (124.042), MERCEDES-BENZ E-Class Coupe (C124) E 320 (124.052), MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG (124.052) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Inner Tie Rod for E-Class Coupe (C124) and other MERCEDES-BENZ models
How to change Rod Assembly on Mercedes C124 E 200 2.0 (124.040) – step-by-step instructions for straightforward car repair Rod Assembly
How to change Rod Assembly on E-Class Coupe (C124) – tips for proper car maintenance
Rod Assembly for E-Class Coupe (C124) Petrol (136 hp)
Simple DIY car repair steps – Replacing Rod Assembly on E-Class Coupe (C124)
Rod Assembly for E-Class Coupe (C124) Petrol (150 hp)
Easy tricks to help you to replace Rod Assembly on E-Class Coupe (C124)
Rod Assembly for E-Class Coupe (C124) Petrol (220 hp)
Rod Assembly removal & installation, incredibly easy steps for E-Class Coupe (C124)
Rod Assembly for E-Class Coupe (C124) Petrol (272 hp)
Tools
Replacement: inner tie rod – MERCEDES-BENZ E-CLASS Coupe (C124). Tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #13
Combination spanner #17
Combination spanner #19
Combination spanner #22
Drive socket # 13
Drive socket # 17
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Buy tools
Replacement: inner tie rod – MERCEDES-BENZ E-CLASS Coupe (C124). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: inner tie rod – MERCEDES-BENZ E-CLASS Coupe (C124). Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Inner Tie Rod on Mercedes C124 1993 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace MERCEDES-BENZ E-Class Coupe (C124) E 200 2.0 (124.040) 1994 Inner Tie Rod - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Coupe (C124)
  3. Step 5
    Mercedes C124 E 320 3.2 (124.052) 1995 Inner Tie Rod replacement: free workshop manuals
    Remove the wheels.
  4. Step 6
    Changing Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG 3.6 (124.052) 1996 by yourself
    Clean the steering damper fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ E-CLASS E 200 2.0 (124.040) 1997 Inner Tie Rod - online easy-to-follow instructions
    Unscrew the steering damper fasteners. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  6. Step 8
    Remove the fastening bolts.
    Step 9
    How to replace Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) 1993: download PDF manuals and video instructions
    Remove the steering damper.
  7. Step 10
    How hard is it to do yourself: Inner Tie Rod replacement on Mercedes C124 E 220 2.2 (124.042) 1994 - download illustrated guide
    Clean the tie rod ends fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 11
    Need to know how to renew Inner Tie Rod on MERCEDES-BENZ E-CLASS 1995? This free workshop manual will help you to do it yourself
    Unscrew the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
  9. Step 12
    Changing of Inner Tie Rod on Mercedes C124 1996 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the tie rod end to the idler arm. Use a drive socket #17. Use a ratchet wrench.
  10. Step 13
    MERCEDES-BENZ E-CLASS E 200 2.0 (124.040) Inner Tie Rod replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  11. Step 14
    Replacing Inner Tie Rod on Mercedes C124 1993 E 200 2.0 (124.040) by yourself
    Detach the tie rod end from the idler arm. Use a ball joint puller.
  12. Step 15
    E-Class Coupe (C124) E 200 2.0 (124.040) 1994 Inner Tie Rod DIY replacement workshop manual
    Remove the steering tie rod.
  13. Step 16
    How to change Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) 1995 - tips and tricks
    Clean the tie rod ends fasteners. Use a wire brush. Use WD-40 spray.
  14. Step 17
    Step-by-step recommendations for DIY replacement Mercedes C124 1996 E 200 2.0 (124.040) Inner Tie Rod
    Unscrew the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
  15. Step 18
    DIY replacement of Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) E 220 2.2 (124.042) 1997 is not an issue anymore with our step-by-step tutorial
    Unscrew the fastener connecting the tie rod end to the idler arm. Use a drive socket #17. Use a ratchet wrench.
  16. Step 19
    How to change Inner Tie Rod on Mercedes C124 1993 - free PDF and video manuals
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  17. Step 20
    Detach the tie rod end from the idler arm. Use a ball joint puller.
    Step 21
    How to replace MERCEDES-BENZ E-Class Coupe (C124) E 200 2.0 (124.040) 1994 Inner Tie Rod - step-by-step manuals and video guides
    Remove the steering tie rod.
  18. Step 22
    Mercedes C124 E 320 3.2 (124.052) 1995 Inner Tie Rod replacement: free workshop manuals
    Clean the centre drag link ends fasteners. Use a wire brush. Use WD-40 spray.
  19. Step 23
    Changing Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) E 36 AMG 3.6 (124.052) 1996 by yourself
    Unscrew the centre drag link fasteners from the idler arms. Use a combination spanner #19.
  20. Step 24
    How to remove MERCEDES-BENZ E-CLASS E 200 2.0 (124.040) 1997 Inner Tie Rod - online easy-to-follow instructions
    Detach the centre drag link ends from the idler arms. Use a ball joint puller.
  21. Step 25
    How to replace Inner Tie Rod on MERCEDES-BENZ E-Class Coupe (C124) 1993: download PDF manuals and video instructions
    Remove the centre drag link.
  22. Step 26
    How hard is it to do yourself: Inner Tie Rod replacement on Mercedes C124 E 220 2.2 (124.042) 1994 - download illustrated guide
    Clean the mounting seats of the drag link and tie rods. Use a wire brush. Use all-purpose cleaning spray.
  23. Step 27
    Need to know how to renew Inner Tie Rod on MERCEDES-BENZ E-CLASS 1995? This free workshop manual will help you to do it yourself
    Install a new centre drag link.
  24. Step 28
    Changing of Inner Tie Rod on Mercedes C124 1996 won't be an issue if you follow this illustrated step-by-step guide
    Tighten the fasteners connecting the centre drag link ends to the idler arms. Use a drive socket #19. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Coupe (C124) model.

Browse tyres

Popular maintenance tutorials for Mercedes C124

More manuals for Mercedes C124

Complete guides for changing the Inner track rod end on different MERCEDES-BENZ E-CLASS models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ E-Class Coupe (C124) Inner Tie Rod replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ E-Class Coupe (C124) Inner Tie Rod replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class Coupe (C124)
View more
  • How to change Inner track rod end on MERCEDES-BENZ E-Class Coupe (C124) E 220 2.2 (124.042) - replacement tricks
    What to check when buying a used car | AUTODOC tips
    5K views
    Published on: 24/10/2020
  • Changing Inner track rod Mercedes C124 E 200 2.0 (124.040) - Replacement Tips
    How to paint a brake caliper | AUTODOC tips
    10K views
    Published on: 08/04/2021
  • Maintenance Hacks - MERCEDES-BENZ E-Class Coupe (C124) E 320 3.2 (124.052) Rack end replacement guide
    How to fix your car with AUTODOC CLUB
    16K views
    Published on: 30/11/2021
  • Replace Inner tie rod end on Mercedes C124 - free video tips
    TOP 4 car cleaning products | AUTODOC tips
    2K views
    Published on: 26/08/2021

Most commonly replaced car parts on MERCEDES-BENZ E-CLASS

Professional manuals for the most common MERCEDES-BENZ models