Disclaimer
How to change front anti roll bar bushes on MERCEDES-BENZ E-Class Coupe (C124) – replacement guide
downloads:
2
Views:
33
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Coupe (C124) E 320 (124.052) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Coupe (C124) E 320 (124.052) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Bushes for E-Class Coupe (C124) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #13
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Tap wrench
Water pump pliers
Wheel chock
Replacement: anti roll bar bushes – MERCEDES-BENZ E-CLASS Coupe (C124). AUTODOC recommends:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- Warning! Shut down the engine before starting any work – MERCEDES-BENZ E-CLASS Coupe (C124).
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench. - Step 3Raise the car.Replacement: anti roll bar bushes – MERCEDES-BENZ E-CLASS Coupe (C124). Tip:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Coupe (C124) - Step 5
Remove the wheels. - Step 6
Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners of the stabilizer bush brackets. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the fastening bolts. - Step 9
Remove the stabilizer bush brackets. - Step 10
Remove the anti-roll bar. - Step 11
Remove the stabilizer bushes. - Step 12
Clean the mounting seats of the stabilizer bushes. Use a wire brush. Use all-purpose cleaning spray. - Step 13
Install the new stabilizer bushes. - Step 14
Clean the brackets of the anti-roll bar bushes. Use a wire brush. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Coupe (C124) model
Popular maintenance tutorials for Mercedes C124
Complete guides for changing the Stabilizer bushes on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Coupe (C124)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
K2 ROTON wheel cleaner overview
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























