Important!
This replacement procedure can be used for:
ALFA ROMEO GT (937) 1.9 JTD (937CXN1B, 937CXZ1B), ALFA ROMEO GT (937) 1.9 JTD (937CXN1B), ALFA ROMEO GT (937) 3.2 GTA (937CXP1B), ALFA ROMEO GT (937) 2.0 JTS (937CXH1A, 937CXH11), ALFA ROMEO GT (937) 1.8 TS (937CXR1A), ALFA ROMEO GT (937) 2.0 JTS (937CXH11, 937CXH1A, 937CXT1A) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: rear lower arm – ALFA ROMEO GT (937). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #19
Drive socket # 15
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear lower arm – ALFA ROMEO GT (937). AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – ALFA ROMEO GT (937) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Alfa Romeo GT 937 2003 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace ALFA ROMEO GT (937) 1.9 JTD (937CXN1B) 2004 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. ALFA ROMEO GT (937)
  3. Step 5
    Alfa Romeo GT 937 2.0 JTS (937CXH1A, 937CXH11) 2005 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on ALFA ROMEO GT (937) 1.8 TS (937CXR1A) 2006 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
    AUTODOC recommends:
    Replacement: rear lower arm – ALFA ROMEO GT (937). After applying the spray, wait a few minutes.Wear protective goggles.Wear a respirator.
  5. Step 7
    How to remove ALFA ROMEO GT 1.9 JTD (937CXN1B, 937CXZ1B) 2007 Control Arm - online easy-to-follow instructions
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #19. Use a drive socket #19. Use a tap wrench.
  6. Step 8
    How to replace Control Arm on ALFA ROMEO GT (937) 2008: download PDF manuals and video instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
    Replacement: rear lower arm – ALFA ROMEO GT (937). Professionals recommend:
    After applying the spray, wait a few minutes.Wear protective goggles.Wear a respirator.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Alfa Romeo GT 937 3.2 GTA 2009 - download illustrated guide
    Unscrew the rear fastener connecting the control arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Control Arm on ALFA ROMEO GT 2010? This free workshop manual will help you to do it yourself
    Remove the fastening bolts.
  9. Step 11
    Changing of Control Arm on Alfa Romeo GT 937 2003 won't be an issue if you follow this illustrated step-by-step guide
    Remove the arm.
  10. Step 12
    ALFA ROMEO GT 2.0 (937CXT1A) Control Arm replacement: online guides and video tutorials
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Control Arm on Alfa Romeo GT 937 2005 1.9 JTD (937CXN1B) by yourself
    Install a new arm.
    Replacement: rear lower arm – ALFA ROMEO GT (937). Tip from AUTODOC experts:
    During the installation process, use only new bolts and nuts.
  12. Step 14
    GT (937) 1.9 JTD (937CXN1B, 937CXZ1B) 2006 Control Arm DIY replacement workshop manual
    Install the fastening bolts.
  13. Step 15
    How to change Control Arm on ALFA ROMEO GT (937) 2007 - tips and tricks
    Screw the rear fastener connecting the control arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  14. Step 16
    Step-by-step recommendations for DIY replacement Alfa Romeo GT 937 2008 1.9 JTD (937CXN1B, 937CXZ1B) Control Arm
    Support the arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the ALFA ROMEO GT (937) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
ALFA ROMEO GT (937) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY ALFA ROMEO GT (937) Control Arm replacement - online guide
Tips & tricks for your ALFA ROMEO GT (937)
View more
  • How to change Control arm on ALFA ROMEO GT (937) 3.2 GTA (937CXP1B) - replacement tricks
    How to paint a brake caliper | AUTODOC tips
  • Changing Wishbone Alfa Romeo GT 937 1.9 JTD (937CXN1B) - Replacement Tips
    How to remove scratches from car plastic | AUTODOC tips
  • Maintenance Hacks - ALFA ROMEO GT (937) 2.0 JTS (937CXH1A, 937CXH11) Control arms replacement guide
    How to clean an engine bay | AUTODOC
  • Replace Trailing arm on Alfa Romeo GT 937 - free video tips
    Things you should never do with your manual transmission | AUTODOC tips

Professional manuals for the most common ALFA ROMEO models