Important!

This replacement procedure can be used for:
ALFA ROMEO GT (937) 2.0 JTS (937CXH11, 937CXH1A, 937CXT1A), ALFA ROMEO GT (937) 1.8 TS (937CXR1A), ALFA ROMEO GT (937) 2.0 JTS (937CXH1A, 937CXH11), ALFA ROMEO GT (937) 3.2 GTA (937CXP1B), ALFA ROMEO GT (937) 1.9 JTD (937CXN1B), ALFA ROMEO GT (937) 1.9 JTD (937CXN1B, 937CXZ1B) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – ALFA ROMEO GT (937). Tools you need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #17
                    
                      Drive socket # 17
                    
                      HEX bit No.H5
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on ALFA ROMEO GT (937) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – ALFA ROMEO GT (937) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. ALFA ROMEO GT (937)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Undo the fastening nut that attaches the stabilizer link to the shock absorber fork. Use a drive socket #17. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5.
Step 9

Remove the stabiliser link.

Replacement: anti roll bar links – ALFA ROMEO GT (937). AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a combination spanner #17. Use HEX No.H5.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link with the shock absorber fork. Use a combination spanner #17. Use a drive socket #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 15

Treat all joints of the stabiliser link. Use copper grease.
Step 16

Clean the wheel rim mounting seat. Use a wire brush.
Step 17

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 18

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – ALFA ROMEO GT (937). After applying the spray, wait a few minutes.
Step 19

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. ALFA ROMEO GT (937)
Step 20

Screw in the wheel bolts. Use wheel impact socket #17.
Step 21

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 108 Nm torque.
Step 22

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the ALFA ROMEO GT (937) model

Alfa Romeo GT 937 tyre size

How to change rear strut mount on ALFA ROMEO GT (937) – replacement guide

Free download PDF
4.23 MB
How to change front lower arm on ALFA ROMEO GT (937) – replacement guide

Free download PDF
3.22 MB
How to change rear lower arm on ALFA ROMEO GT (937) – replacement guide

Free download PDF
1.67 MB
How to change front strut mount on ALFA ROMEO GT (937) – replacement guide

Free download PDF
3.48 MB
How to change rear anti roll bar links on ALFA ROMEO GT (937) – replacement guide

Free download PDF
1.47 MB
How to change front brake pads on ALFA ROMEO GT (937) – replacement guide

Free download PDF
1.9 MB

How to change rear anti roll bar links on ALFA ROMEO GT (937) – replacement guide

Free download PDF
1.47 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Alfa Romeo 147 937 – replacement guide

Free download PDF
1.52 MB
How to change rear anti roll bar links on Alfa Romeo 147 937 – replacement guide

Free download PDF
1.45 MB
How to change front anti roll bar links on Alfa Romeo 159 Sportwagon – replacement guide

Free download PDF
1.52 MB
How to change rear anti roll bar links on Alfa Romeo 159 Sportwagon – replacement guide

Free download PDF
1.36 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!

7K views

Published on: 05/08/2021
How I started restoring a driveshaft | Drivetrain restoration – Part 1

8K views

Published on: 17/10/2024
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips

8K views

Published on: 16/12/2021
Three ways to change oil without a lift

10K views

Published on: 18/09/2025