Disclaimer
How to change rear lower arm on Alfa Romeo 147 937 – replacement guide
downloads:
5
Views:
62
Important!
This replacement procedure can be used for:
ALFA ROMEO 147 (937) 2.0 16V T.SPARK (937.AXA1, 937.AXC1, 937.BXC1), ALFA ROMEO 147 (937) 1.6 16V T.SPARK ECO (937.AXA1A, 937.BXA1A), ALFA ROMEO 147 (937) 1.9 JTD (937.AXD1A, 937.BXD1A, 937.AXV1A, 937.BXB1A,..., ALFA ROMEO 147 (937) 3.2 GTA (937.AXL1), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXG1B, 937.BXG1B), ALFA ROMEO 147 (937) 1.9 JTD (937.AXF1A, 937.BXF1A), ALFA ROMEO 147 (937) 1.9 JTDM 8V (937.AXD1A, 937.AXU1A, 937.BXU1A), ALFA ROMEO 147 (937) 1.9 JTDM 16V (937.AXN1B, 937.BXN1B), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXG1B, 937.BXG1B), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXM1B, 937.AXS1B), ALFA ROMEO 147 (937) 1.9 JTDM (937.AXD1A, 937.AXV1A, 937.BXB1A), ALFA ROMEO 147 (937) 2.0 (937.AXC, 937.BXC), ALFA ROMEO 147 (937) 1.9 JTDM 16V (937.AXN1B, 937.AXZ1B), ALFA ROMEO 147 (937) 1.9 JTD (937AXD1A, 937BXD1A), ALFA ROMEO 147 (937) 1.6 LPG (937BXB1A), ALFA ROMEO 147 (937) 1.6 LPG (937AXA1A) … View more
The steps may slightly vary depending on the car design.
ALFA ROMEO 147 (937) 2.0 16V T.SPARK (937.AXA1, 937.AXC1, 937.BXC1), ALFA ROMEO 147 (937) 1.6 16V T.SPARK ECO (937.AXA1A, 937.BXA1A), ALFA ROMEO 147 (937) 1.9 JTD (937.AXD1A, 937.BXD1A, 937.AXV1A, 937.BXB1A,..., ALFA ROMEO 147 (937) 3.2 GTA (937.AXL1), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXG1B, 937.BXG1B), ALFA ROMEO 147 (937) 1.9 JTD (937.AXF1A, 937.BXF1A), ALFA ROMEO 147 (937) 1.9 JTDM 8V (937.AXD1A, 937.AXU1A, 937.BXU1A), ALFA ROMEO 147 (937) 1.9 JTDM 16V (937.AXN1B, 937.BXN1B), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXG1B, 937.BXG1B), ALFA ROMEO 147 (937) 1.9 JTD 16V (937.AXM1B, 937.AXS1B), ALFA ROMEO 147 (937) 1.9 JTDM (937.AXD1A, 937.AXV1A, 937.BXB1A), ALFA ROMEO 147 (937) 2.0 (937.AXC, 937.BXC), ALFA ROMEO 147 (937) 1.9 JTDM 16V (937.AXN1B, 937.AXZ1B), ALFA ROMEO 147 (937) 1.9 JTD (937AXD1A, 937BXD1A), ALFA ROMEO 147 (937) 1.6 LPG (937BXB1A), ALFA ROMEO 147 (937) 1.6 LPG (937AXA1A) … View more
The steps may slightly vary depending on the car design.
How to change rear suspension arm on ALFA ROMEO 147 (937) [TUTORIAL AUTODOC]

All the parts you need to replace – Control Arm for 147 (937) and other ALFA ROMEO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #19
Drive socket # 15
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear lower arm – Alfa Romeo 147 937. AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- Please note: all work on the car – Alfa Romeo 147 937 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the rear of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Alfa Romeo 147 937 - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.AUTODOC recommends:Replacement: rear lower arm – Alfa Romeo 147 937. After applying the spray, wait a few minutes.Wear protective goggles.Wear a respirator. - Step 7
Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #19. Use a drive socket #19. Use a tap wrench. - Step 8
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: rear lower arm – Alfa Romeo 147 937. Professionals recommend:After applying the spray, wait a few minutes.Wear protective goggles.Wear a respirator. - Step 9
Unscrew the rear fastener connecting the control arm to the car body. Use a drive socket #15. Use a ratchet wrench. - Step 10
Remove the fastening bolts. - Step 11
Remove the arm. - Step 12
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 13
Install a new arm.Replacement: rear lower arm – Alfa Romeo 147 937. Tip from AUTODOC experts:During the installation process, use only new bolts and nuts. - Step 14
Install the fastening bolts. - Step 15
Screw the rear fastener connecting the control arm to the car body. Use a drive socket #15. Use a ratchet wrench. - Step 16
Support the arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALFA ROMEO 147 (937) model
Popular maintenance tutorials for Alfa Romeo 147 937
Complete guides for changing the Control arm on different ALFA ROMEO 147 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALFA ROMEO 147 (937)
View more
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
DIY rear axle restoration | Drivetrain restoration – Part 2
Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Most commonly replaced car parts on ALFA ROMEO 147
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















