
Disclaimer
How to change rear brake pads on PEUGEOT 206 Saloon – replacement guide
downloads:
0
Views:
12

Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 206 Saloon 1.6 16V … View more
The steps may slightly vary depending on the car design.
PEUGEOT 206 Saloon 1.6 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pads for 206 Saloon and other PEUGEOT models
Brake pad set
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Anti-squeal paste
Wheel impact socket #19
Brake caliper wind back tool
Torque wrench
Rubber mallet
Round-nose pliers
Crow bar
Wheel chock
Replacement: brake pads – PEUGEOT 206 Saloon. AUTODOC experts recommend:
- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- Replacement: brake pads – PEUGEOT 206 Saloon. Use the following procedure:
Carry out replacement in the following order:
- Step 1Open the bonnet. Unscrew the brake fluid reservoir cap.Step 2Secure the wheels with chocks.
- Step 3Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 4Raise the rear of the car and secure on supports.Step 5Unscrew the wheel bolts.Replacement: brake pads – PEUGEOT 206 Saloon. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 6Remove the wheel.
- Step 7Remove the retaining springs of the brake pads. Use a crowbar.
- Step 8Remove the brake pad retaining pin. Use round-nose pliers.
- Step 9Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
- Step 10Remove the retainer of the brake pads. Use a crowbar. Use a rubber mallet.
- Step 11Remove the brake pads. Use a crowbar.Replacement: brake pads – PEUGEOT 206 Saloon. Tip from AUTODOC experts:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 12Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.Replacement: brake pads – PEUGEOT 206 Saloon. AUTODOC recommends:Make sure the disc surface is clean before installing the pads.
- Step 13Install new brake pads.Replacement: brake pads – PEUGEOT 206 Saloon. Tip:Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 206 Saloon model
Popular maintenance tutorials for Peugeot 206 Saloon
Complete guides for changing the Brake pad set on different PEUGEOT 206 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 206 Saloon
View more
- How to Get the Best Deals on Car Parts | Save Money with AUTODOC
- What to do if the ABS light comes on: DIY Diagnostics Tips
- Top 5 reasons why the suspension knocks | AUTODOC tips
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Most commonly replaced car parts on PEUGEOT 206
Time to replace parts? Get even better deals in our Shop app.

SCAN ME