Important!
This replacement procedure can be used for:
PEUGEOT 206 Saloon 1.4, PEUGEOT 206 Saloon 1.6 16V, PEUGEOT 206 Saloon 1.4 HDi eco 70 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for 206 Saloon and other PEUGEOT models
Tools
Replacement: wheel bearing – PEUGEOT 206 Saloon. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 19
Drive socket # 32
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Round-nose pliers
Flat chisel
Rubber mallet
Impact screwdriver
3-Arm Gear Puller
Crow bar
Wheel chock
Replacement: wheel bearing – PEUGEOT 206 Saloon. Professionals recommend:
  • Do not re-use the bearing assembly of your PEUGEOT 206 Salooncar.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – PEUGEOT 206 Saloon. Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Peugeot 206 Saloon 2007 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 206 Saloon 1.4 HDi eco 70 2008 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Peugeot 206 Saloon 1.4 2009 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: wheel bearing – PEUGEOT 206 Saloon. AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Wheel Bearing on PEUGEOT 206 Saloon 1.4 HDi eco 70 2010 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 206 1.4 2011 Wheel Bearing - online easy-to-follow instructions
    Remove the retaining springs of the brake pads. Use a crowbar.
  6. Step 7
    How to replace Wheel Bearing on PEUGEOT 206 Saloon 2012: download PDF manuals and video instructions
    Remove the brake pad retaining pin. Use round-nose pliers.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Peugeot 206 Saloon 1.4 HDi eco 70 2013 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Wheel Bearing on PEUGEOT 206 2014? This free workshop manual will help you to do it yourself
    Remove the retainer of the brake pads. Use a crowbar. Use a rubber mallet.
  9. Step 10
    Changing of Wheel Bearing on Peugeot 206 Saloon 2015 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads. Use a crowbar.
  10. Step 11
    PEUGEOT 206 1.6 16V Wheel Bearing replacement: online guides and video tutorials
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 12
    Replacing Wheel Bearing on Peugeot 206 Saloon 2017 1.4 HDi eco 70 by yourself
    Unscrew the brake caliper fastening. Use a drive socket #19. Use a ratchet wrench.
  12. Step 13
    206 Saloon 1.4 2018 Wheel Bearing DIY replacement workshop manual
    Remove the brake caliper.
    Replacement: wheel bearing – PEUGEOT 206 Saloon. Tip from AUTODOC:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  13. Step 14
    How to change Wheel Bearing on PEUGEOT 206 Saloon 2019 - tips and tricks
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  14. Step 15
    Step-by-step recommendations for DIY replacement Peugeot 206 Saloon 2020 1.4 Wheel Bearing
    Unscrew the brake disc fastening. Use Torx T30. Use an impact screwdriver.
  15. Step 16
    Remove the brake disc.
    Step 17
    DIY replacement of Wheel Bearing on PEUGEOT 206 Saloon 1.6 16V 2021 is not an issue anymore with our step-by-step tutorial
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – PEUGEOT 206 Saloon. AUTODOC experts recommend:
    Some cars are not equipped with wheel hub caps.
  16. Step 18
    How to change Wheel Bearing on Peugeot 206 Saloon 2007 - free PDF and video manuals
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  17. Step 19
    How to replace PEUGEOT 206 Saloon 1.4 HDi eco 70 2008 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench.
  18. Step 20
    Peugeot 206 Saloon 1.4 2009 Wheel Bearing replacement: free workshop manuals
    Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
  19. Step 21
    Changing Wheel Bearing on PEUGEOT 206 Saloon 1.4 HDi eco 70 2010 by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  20. Step 22
    How to remove PEUGEOT 206 1.4 2011 Wheel Bearing - online easy-to-follow instructions
    Install the new wheel hub with a bearing.
  21. Step 23
    How to replace Wheel Bearing on PEUGEOT 206 Saloon 2012: download PDF manuals and video instructions
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 230 Nm torque.
    Replacement: wheel bearing – PEUGEOT 206 Saloon. Tip:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 206 Saloon model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 206 Saloon Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 206 Saloon Wheel Bearing replacement - online guide
Tips & tricks for your PEUGEOT 206 Saloon
View more
  • How to change Wheel bearings on PEUGEOT 206 Saloon 1.6 16V - replacement tricks
    Top 5 brake repair mistakes | AUTODOC tips
  • Changing Hub bearing Peugeot 206 Saloon 1.4 HDi eco 70 - Replacement Tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC
  • Maintenance Hacks - PEUGEOT 206 Saloon 1.4 Wheel bearing kit replacement guide
    How to save when buying car parts
  • Replace Wheel hub bearing on Peugeot 206 Saloon - free video tips
    5 common car washing mistakes | AUTODOC tips