Disclaimer
How to change rear brake pad wear sensor on BMW 1 Hatchback (E87) – replacement guide
downloads:
9
Views:
263
Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
BMW 1 Hatchback (E87) 116i, BMW 1 Hatchback (E87) 116i, BMW 1 Hatchback (E87) 116 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 116d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 123d, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 120d … View more
The steps may slightly vary depending on the car design.
BMW 1 Hatchback (E87) 116i, BMW 1 Hatchback (E87) 116i, BMW 1 Hatchback (E87) 116 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 116d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 118d, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 123d, BMW 1 Hatchback (E87) 118 i, BMW 1 Hatchback (E87) 120d … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pad Wear Sensor for 1 Hatchback (E87) and other BMW models
Alternative products

Brake cleaner
Copper grease
Drive socket # 10
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
Replacement: brake pad wear sensor – BMW 1 (E87). AUTODOC recommends:
- The replacement procedure is identical for both brake pad wear sensors on the same axle.
- Warning! Shut down the engine before starting any work – BMW 1 (E87).
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: brake pad wear sensor – BMW 1 (E87). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the brake pad wear sensor from the brake pad. - Step 7
Disconnect the brake pads wear sensor. Use a crowbar. - Step 8
Unscrew the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 9
Move the part aside. - Step 10
Disconnect the brake pad wear sensor plug. - Step 11
Connect the brake pad wear sensor plug.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Hatchback (E87) model
Popular maintenance tutorials for BMW E87
Complete guides for changing the Brake pad wear indicator on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Hatchback (E87)
View more
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
2 ways to clean the EGR valve – which one is better?
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
DIY jack restoration | AUTODOC tips
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























