
Disclaimer
How to change front brake pad wear sensor on BMW E82 – replacement guide
downloads:
7
Views:
161

Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
BMW 1 Coupe (E82) 118 d, BMW 1 Coupe (E82) 135 i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 123d, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 120 i, BMW 1 Coupe (E82) 118 d, BMW 1 Coupe (E82) 120 i, BMW 1 Coupe (E82) 120d … View more
The steps may slightly vary depending on the car design.
BMW 1 Coupe (E82) 118 d, BMW 1 Coupe (E82) 135 i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 123d, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 120 i, BMW 1 Coupe (E82) 118 d, BMW 1 Coupe (E82) 120 i, BMW 1 Coupe (E82) 120d … View more
The steps may slightly vary depending on the car design.
How to change front brake pad wear sensor on BMW 1 Series E82 [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Pad Wear Sensor for 1 Coupe (E82) and other BMW models
Brake pad wear sensor
Alternative products

Nylon cleaning brush
Electronic spray
Brake cleaner
Copper grease
Wheel impact socket #17
Torque wrench
Wheel chock
Replacement: brake pad wear sensor – BMW E82. AUTODOC recommends:
- The replacement procedure is identical for both brake pad wear sensors on the same axle.
- All work should be done with the engine stopped.
Replacement: brake pad wear sensor – BMW E82. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.
- Step 4Unscrew the wheel bolts.Replacement: brake pad wear sensor – BMW E82. AUTODOC experts recommend:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the brake pad wear sensor from the brake pad.
- Step 7Disconnect the brake pads wear sensor.
- Step 8Clean the brake pad wear sensor plug. Use a nylon cleaning brush.
- Step 9Disconnect the brake pad wear sensor plug.
- Step 10Treat the brake pad wear sensor plug. Use dielectric grease.
- Step 11Connect the brake pad wear sensor plug.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Coupe (E82) model
Popular maintenance tutorials for BMW E82
Complete guides for changing the Brake pad wear indicator on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Coupe (E82)
View more
- How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
- 5 tools that make car repair incredibly simple | AUTODOC tips
- TOP 5 mistakes during DIY oil change | AUTODOC tips
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME