Disclaimer
How to change front ABS sensor on BMW 1 Hatchback (E87) – replacement guide
downloads:
23
Views:
581
Important!
This replacement procedure can be used for:
BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 123d … View more
The steps may slightly vary depending on the car design.
BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 120i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 130i, BMW 1 Hatchback (E87) 120d, BMW 1 Hatchback (E87) 123d … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for 1 Hatchback (E87) and other BMW models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Multipurpose grease
Copper grease
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Round-nose pliers
Wheel chock
Replacement: abs sensor – BMW 1 (E87). Professionals recommend:
- The replacement procedure is identical for both ABS sensors on the same axle.
- All work should be done with the engine stopped.
Replacement: abs sensor – BMW 1 (E87). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 1 (E87) - Step 5
Remove the wheel. - Step 6
Disconnect the ABS sensor wiring. - Step 7
Detach the ABS sensor connector. - Step 8
Disconnect the ABS sensor wiring. - Step 9
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the ABS sensor fastening from the steering knuckle. Use HEX No.H5. Use a ratchet wrench. - Step 11
Remove the ABS sensor from the steering knuckle. Use round-nose pliers. - Step 12
Clean the ABS sensor mounting seat. Use a wire brush. Use all-purpose cleaning spray. - Step 13
Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver. - Step 14
Install the ABS sensor on the steering knuckle and secure it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Hatchback (E87) model
Popular maintenance tutorials for BMW E87
Complete guides for changing the Wheel speed sensor on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Hatchback (E87)
View more
Motorcycle fuel tank restoration
DIY starter repair | AUTODOC tips
How to fix your car with AUTODOC CLUB
5 tools that make car repair incredibly simple | AUTODOC tips
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























