Disclaimer
How to change front brake pad wear sensor on BMW 1 Hatchback (E81) – replacement guide
downloads:
12
Views:
191
Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
BMW 1 Hatchback (E81) 116i, BMW 1 Hatchback (E81) 120d, BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 118 i, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 118 d, BMW 1 Hatchback (E81) 120d, BMW 1 Hatchback (E81) 123 d, BMW 1 Hatchback (E81) 116i, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 116 i, BMW 1 Hatchback (E81) 116 d, BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 118 d, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 118 i, BMW 1 Hatchback (E81) 116 d, BMW 1 Hatchback (E81) 120d … View more
The steps may slightly vary depending on the car design.
BMW 1 Hatchback (E81) 116i, BMW 1 Hatchback (E81) 120d, BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 118 i, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 118 d, BMW 1 Hatchback (E81) 120d, BMW 1 Hatchback (E81) 123 d, BMW 1 Hatchback (E81) 116i, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 116 i, BMW 1 Hatchback (E81) 116 d, BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 118 d, BMW 1 Hatchback (E81) 120i, BMW 1 Hatchback (E81) 118 i, BMW 1 Hatchback (E81) 116 d, BMW 1 Hatchback (E81) 120d … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pad Wear Sensor for 1 Hatchback (E81) and other BMW models
Alternative products

Nylon cleaning brush
Electronic spray
Brake cleaner
Copper grease
Wheel impact socket #17
Torque wrench
Wheel chock
Replacement: brake pad wear sensor – BMW 1 (E81). AUTODOC recommends:
- The replacement procedure is identical for both brake pad wear sensors on the same axle.
- All work should be done with the engine stopped.
Replacement: brake pad wear sensor – BMW 1 (E81). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: brake pad wear sensor – BMW 1 (E81). AUTODOC experts recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the brake pad wear sensor from the brake pad. - Step 7
Disconnect the brake pads wear sensor. - Step 8
Clean the brake pad wear sensor plug. Use a nylon cleaning brush. - Step 9
Disconnect the brake pad wear sensor plug. - Step 10
Treat the brake pad wear sensor plug. Use dielectric grease. - Step 11
Connect the brake pad wear sensor plug.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Hatchback (E81) model
Popular maintenance tutorials for BMW E81
Complete guides for changing the Brake pad wear indicator on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Hatchback (E81)
View more
3 essential tips for choosing summer tyres | Get ready for warmer weather
5 Essential Tips for beginner drivers: Avoid Common Mistakes
DIY starter repair | AUTODOC tips
Top 5 possible reasons your car is shaking or vibrating
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























