Disclaimer
How to change rear anti roll bar links on VOLVO S60 I (384) – replacement guide
downloads:
5
Views:
49
Important!
This replacement procedure can be used for:
VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4 T, VOLVO S60 I (384) T5, VOLVO S60 I (384) D5, VOLVO S60 I (384) 2.4 T AWD, VOLVO S60 I (384) 2.0 T, VOLVO S60 I (384) 2.4 Bifuel (CNG), VOLVO S60 I (384) R 2,5 T AWD, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) 2.5 T, VOLVO S60 I (384) 2.5 T AWD, VOLVO S60 I (384) T5, VOLVO S60 I (384) D5, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) T5, VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) 2.4 Bifuel (LPG), VOLVO S60 I (384) 2.4 CDI … View more
The steps may slightly vary depending on the car design.
VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4 T, VOLVO S60 I (384) T5, VOLVO S60 I (384) D5, VOLVO S60 I (384) 2.4 T AWD, VOLVO S60 I (384) 2.0 T, VOLVO S60 I (384) 2.4 Bifuel (CNG), VOLVO S60 I (384) R 2,5 T AWD, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) 2.5 T, VOLVO S60 I (384) 2.5 T AWD, VOLVO S60 I (384) T5, VOLVO S60 I (384) D5, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) T5, VOLVO S60 I (384) 2.4, VOLVO S60 I (384) 2.4 D, VOLVO S60 I (384) 2.4 Bifuel (LPG), VOLVO S60 I (384) 2.4 CDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for S60 I (384) and other VOLVO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Impact socket №18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VOLVO S60 I in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO S60 I. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VOLVO S60 I - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #18. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #18. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – VOLVO S60 I. Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Treat all joints of the stabiliser link. Use copper grease. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VOLVO S60 I (P24, 384) model
Popular maintenance tutorials for Volvo s60 1
Complete guides for changing the Drop links on different VOLVO S60 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VOLVO S60 I (384)
View more
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
DIY vehicle AC compressor restoration
5 Essential Tips for beginner drivers: Avoid Common Mistakes
DIY engine block coffee table
Most commonly replaced car parts on VOLVO S60
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















