Disclaimer
How to change rear anti roll bar links on TOYOTA RAV4 V (XA50) – replacement guide
downloads:
2
Views:
22
Important!
This replacement procedure can be used for:
TOYOTA RAV4 V (XA50) 2.5 Hybrid AWD (AXAH54), TOYOTA RAV4 V (XA50) 2.0 AWD (MXAA54), TOYOTA RAV4 V (XA50) 2.0 (MXAA52) … View more
The steps may slightly vary depending on the car design.
TOYOTA RAV4 V (XA50) 2.5 Hybrid AWD (AXAH54), TOYOTA RAV4 V (XA50) 2.0 AWD (MXAA54), TOYOTA RAV4 V (XA50) 2.0 (MXAA52) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for RAV4 V (XA50) and other TOYOTA models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Combination spanner #17
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA RAV4 V (XA50) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA RAV4 V (XA50). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. TOYOTA RAV4 V (XA50) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #17. - Step 8
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA RAV4 V (XA50). Professionals recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11Treat all joints of the stabiliser link. Use copper grease.Step 12
Install a new rod, tighten the fasteners. Use a drive socket #17. Use a combination spanner #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA RAV4 V (XA50) model
Popular maintenance tutorials for TOYOTA RAV4 V (XA50)
Free download PDF
1.18 MB
Free download PDF593.92 KB
Free download PDF706.56 KB
Free download PDF2.04 MB
Free download PDF2.32 MB
Free download PDF2.23 MB
Complete guides for changing the Drop links on different TOYOTA RAV4 models
Free download PDF1.32 MB
Free download PDF1.35 MB
Free download PDF1.32 MB
Free download PDF1.43 MB
Free download PDF1.27 MB
Free download PDF1.24 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA RAV4 V (XA50)
View more
Don’t Replace, Restore: Fixing Damaged Threads at Home
5 more brake repair mistakes | Stop making these brake repair mistakes
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Most commonly replaced car parts on TOYOTA RAV4
Time to replace parts? Get even better deals in our Shop app.
SCAN ME