How to carry out replacement: Mass Air Flow Sensor 1.6 VW Bora 1j2
Disclaimer
Change VW Bora 1j2 1.9 TDI Mass Air Flow Sensor yourself – manuals and video tutorials

How to change mass air flow sensor on VW Bora Saloon (1J2) – replacement guide

downloads: 1
Views: 9
Download your free tutorial and fix VW Bora Saloon (1J2) 1.6 16V problems yourself Download for free 972.8 KB Mass Air Flow Sensor for VW Bora 1j2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VW Bora Saloon (1J2) 1.6, VW Bora Saloon (1J2) 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Mass Air Flow Sensor for Bora Saloon (1J2) and other VW models
How to change Mass air flow sensor on VW Bora 1j2 1.6 – step-by-step instructions for straightforward car repair Mass air flow sensor
How to change Mass air flow sensor on Bora Saloon (1J2) – tips for proper car maintenance
Mass air flow sensor for Bora Saloon (1J2) Petrol (101 hp)
Simple DIY car repair steps – Replacing Mass air flow sensor on Bora Saloon (1J2)
Mass air flow sensor for Bora Saloon (1J2) Petrol (102 hp)
Tools
Replacement: mass air flow sensor – VW BORA (1J2). Tools you need:
Electronic spray
Torque wrench
Drive socket # 7
Drive socket # 10
Ratchet wrench
Phillips screwdriver
Fender cover
Buy tools
Replacement: mass air flow sensor – VW BORA (1J2). AUTODOC recommends:
  • Сlear the trouble codes from the electronic control unit if necessary.
  • Make sure that no dust or dirt gets into the air duct components and the throttle body.
  • Please note: all work on the car – VW BORA (1J2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Mass Air Flow Sensor on VW Bora 1j2 1998 - free PDF and video manuals
    Detach the air duct housing from the air filter housing.
  2. Step 4
    How to replace VW Bora Saloon (1J2) 1.6 1999 Mass Air Flow Sensor - step-by-step manuals and video guides
    Unscrew the fasteners of the heat shield of the air filter housing. Use a Phillips screwdriver.
  3. Step 5
    VW Bora 1j2 1.6 16V 2000 Mass Air Flow Sensor replacement: free workshop manuals
    Remove the heat shield of the air filter housing.
  4. Step 6
    Changing Mass Air Flow Sensor on VW Bora Saloon (1J2) 2.0 2001 by yourself
    Detach the mass air flow sensor connector.
  5. Step 7
    How to remove VW BORA 2.3 V5 2002 Mass Air Flow Sensor - online easy-to-follow instructions
    Loosen the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
  6. Step 8
    How to replace Mass Air Flow Sensor on VW Bora Saloon (1J2) 2003: download PDF manuals and video instructions
    Unscrew the MAF sensor fasteners. Use a drive socket #10. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Mass Air Flow Sensor replacement on VW Bora 1j2 1.6 2004 - download illustrated guide
    Remove the mass air flow sensor.
  8. Step 10
    Need to know how to renew Mass Air Flow Sensor on VW BORA 2005? This free workshop manual will help you to do it yourself
    Install a new mass air flow sensor.
  9. Step 11
    Changing of Mass Air Flow Sensor on VW Bora 1j2 1998 won't be an issue if you follow this illustrated step-by-step guide
    Tighten the MAF sensor fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 4 Nm torque.
  10. Step 12
    VW BORA 1.9 TDI Mass Air Flow Sensor replacement: online guides and video tutorials
    Screw the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Bora Saloon (1J2) model.

Browse tyres

Popular maintenance tutorials for VW Bora 1j2

More manuals for VW Bora 1j2

Complete guides for changing the MAF sensor on different VW BORA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Bora Saloon (1J2) Mass Air Flow Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Bora Saloon (1J2) Mass Air Flow Sensor replacement - online guide
Tips & tricks for your VW Bora Saloon (1J2)
View more
  • How to change MAF sensor on VW Bora Saloon (1J2) 1.9 TDI - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
    7K views
    Published on: 14/12/2023
  • Changing Mass air flow sensor VW Bora 1j2 1.6 - Replacement Tips
    Top 5 reasons why the suspension knocks | AUTODOC tips
    1M views
    Published on: 09/09/2022
  • Maintenance Hacks - VW Bora Saloon (1J2) 1.6 16V Air flow sensor replacement guide
    How to save when buying car parts
    2K views
    Published on: 03/02/2022
  • Replace Air flow meter on VW Bora 1j2 - free video tips
    How to restore a steering wheel | AUTODOC tips
    32K views
    Published on: 17/02/2022

Most commonly replaced car parts on VW BORA

Professional manuals for the most common VW models