How to carry out replacement: Lambda Sensor 1.2 Adam M13
Disclaimer
Change Adam M13 1.2 Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VAUXHALL Adam (M13) – replacement guide

downloads: 13
Views: 298
Download your free tutorial and fix VAUXHALL Adam (M13) 1.4 S problems yourself Download for free 808.96 KB Lambda Sensor for Adam M13 Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VAUXHALL ADAM
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Adam (M13) 1.4, VAUXHALL Adam (M13) 1.4, VAUXHALL Adam (M13) 1.2 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Adam (M13) and other VAUXHALL models
Alternative products
How to change Lambda sensor on Adam M13 1.2 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VAUXHALL ADAM. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VAUXHALL ADAM. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL ADAM – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Adam M13 2012 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Adam (M13) 1.2 2013 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    Adam M13 1.4 2014 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Adam (M13) 1.4 S 2015 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL ADAM 1.2 2016 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Adam (M13) 2017: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Adam (M13) model

Adam M13 tyre size

Popular maintenance tutorials for Adam M13

More manuals for Adam M13

Complete guides for changing the Oxygen sensor on different VAUXHALL ADAM models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Adam (M13) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Adam (M13)
View more
  • How to change Oxygen sensor on VAUXHALL Adam (M13) 1.0 - replacement tricks
    5 causes of turbocharger failure and how to avoid them
    13K views
    Published on: 04/04/2024
  • Changing O2 sensor Adam M13 1.2 - Replacement Tips
    How to Make a DIY Foam Sprayer | AUTODOC tips
    351K views
    Published on: 23/06/2022
  • Maintenance Hacks - VAUXHALL Adam (M13) 1.4 NOx sensor replacement guide
    How to Fix P0401 ✅ error code Insufficient EGR flow
    4K views
    Published on: 08/05/2025
  • Replace Lambda sensors on Adam M13 - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips
    36K views
    Published on: 17/06/2021

Most commonly replaced car parts on VAUXHALL ADAM

Professional manuals for the most common VAUXHALL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Adam (M13) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME