When to replace the Lambda Sensor on your VAUXHALL ZAFIRA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Zafira Mk I (A) (T98) 1.6 16V, VAUXHALL Zafira Mk I (A) (T98) 1.6 CNG, VAUXHALL Zafira Mk I (A) (T98) 1.6 Dualfuel View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: lambda sensor – VAUXHALL ZAFIRA Mk I (A) (F75). Tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Flare nut wrench #22
Drive socket # 22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – VAUXHALL ZAFIRA Mk I (A) (F75). AUTODOC recommends:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL ZAFIRA Mk I (A) (F75) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Zafira A 1998 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 5
    How to replace VAUXHALL Zafira Mk I (A) (T98) 1.6 16V 1999 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 6
    Zafira A 2.0 DTI 16V 2000 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Zafira Mk I (A) (T98) 2.0 GSI Turbo 2001 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL ZAFIRA 1.6 CNG 2002 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    How to replace Lambda Sensor on VAUXHALL Zafira Mk I (A) (T98) 2003: download PDF manuals and video instructions
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  7. Step 10
    How hard is it to do yourself: Lambda Sensor replacement on Zafira A 1.8 Dualfuel 2004 - download illustrated guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Zafira Mk1 (A) (T98) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Zafira Mk I (A) (T98) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Zafira Mk I (A) (T98) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Zafira Mk I (A) (T98)
View more
  • How to change Oxygen sensor on VAUXHALL Zafira Mk I (A) (T98) 1.8 16V - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Changing O2 sensor Zafira A 1.6 16V - Replacement Tips
    How and why to check your oil | AUTODOC tips
  • Maintenance Hacks - VAUXHALL Zafira Mk I (A) (T98) 2.0 DTI 16V NOx sensor replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Lambda sensors on Zafira A - free video tips
    How to find and change a fuse | AUTODOC