How to carry out replacement: Lambda Sensor 1.3 CDTI 16V VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)
Disclaimer
Change VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.7 DTI 16V Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) – replacement guide

downloads: 8
Views: 56
Download your free tutorial and fix VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V problems yourself Download for free 788.48 KB Lambda Sensor for VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VAUXHALL COMBO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.6, VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for COMBO Mk II (C) Box Body / Estate (F25) and other VAUXHALL models
Alternative products
How to change Lambda sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). Tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Flare nut wrench #22
Drive socket # 22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25). AUTODOC recommends:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 2001 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 5
    How to replace VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V 2002 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 6
    VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.7 DTI 16V 2003 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.6 2004 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL COMBO 1.6 CNG 16V 2005 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    How to replace Lambda Sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 2006: download PDF manuals and video instructions
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  7. Step 10
    How hard is it to do yourself: Lambda Sensor replacement on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.7 DI 16V 2007 - download illustrated guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Combo Mk2 (C) Box Body / Estate (F25) model

VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) tyre size

Popular maintenance tutorials for VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)

More manuals for VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)

Complete guides for changing the Oxygen sensor on different VAUXHALL COMBO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL COMBO Mk II (C) Box Body / Estate (F25)
View more
  • How to change Oxygen sensor on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.7 CDTI 16V - replacement tricks
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
    5K views
    Published on: 04/03/2021
  • Changing O2 sensor VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.3 CDTI 16V - Replacement Tips
    How to fix your car with AUTODOC CLUB
    17K views
    Published on: 30/11/2021
  • Maintenance Hacks - VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) 1.7 DTI 16V NOx sensor replacement guide
    Petrol or diesel: The engine showdown! | AUTODOC
    4K views
    Published on: 04/05/2021
  • Replace Lambda sensors on VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) - free video tips
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
    4K views
    Published on: 01/04/2021

Most commonly replaced car parts on VAUXHALL COMBO

Professional manuals for the most common VAUXHALL models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL COMBO Mk II (C) Box Body / Estate (F25) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME