How to carry out replacement: Lambda Sensor 4.7 (UCK60_) TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_)
Disclaimer
Change TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) 5.7 FLEX 4WD (USK65_) Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on TOYOTA Sequoia II (XK60) – replacement guide

downloads: 0
Views: 2
Download your free tutorial and fix TOYOTA Sequoia II (XK60) 5.7 (USK60_) problems yourself Download for free 819.2 KB Lambda Sensor for TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your TOYOTA SEQUOIA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
TOYOTA Sequoia II (XK60) 5.7 4WD (USK65_), TOYOTA Sequoia II (XK60) 5.7 FLEX 4WD (USK65), TOYOTA Sequoia II (XK60) 5.7 4WD (USK65_), TOYOTA Sequoia II (XK60) 5.7 (USK60_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Sequoia II (XK60) and other TOYOTA models
How to change Lambda sensor on TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) 4.7 (UCK60_) – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Sequoia II (XK60) – tips for proper car maintenance
Lambda sensor for Sequoia II (XK60) Petrol (386 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Sequoia II (XK60)
Lambda sensor for Sequoia II (XK60) Petrol/Ethanol (381 hp)
Easy tricks to help you to replace Lambda sensor on Sequoia II (XK60)
Lambda sensor for Sequoia II (XK60) Petrol (381 hp)
Lambda sensor removal & installation, incredibly easy steps for Sequoia II (XK60)
Lambda sensor for Sequoia II (XK60) Petrol (381 hp)
Tools
Replacement: lambda sensor – TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_). Tools you might need:
Wire brush
WD-40 spray
High-temperature ceramic grease
Electronic spray
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Flat Screwdriver
Long nose pliers
Buy tools
Replacement: lambda sensor – TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Raise the front of the car and secure on supports.
    Step 2
    How to change Lambda Sensor on TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) 2007 - free PDF and video manuals
    Detach the oxygen sensor connector. Use a flat screwdriver. Use long nose pliers.
  2. Step 3
    How to replace TOYOTA Sequoia II (XK60) 4.7 (UCK60_) 2008 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 4
    TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) 5.7 FLEX (USK60_) 2009 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 5
    Changing Lambda Sensor on TOYOTA Sequoia II (XK60) 5.7 4WD (USK65_) 2010 by yourself
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  5. Step 6
    How to remove TOYOTA SEQUOIA 5.7 FLEX 4WD (USK65) 2011 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 7
    How to replace Lambda Sensor on TOYOTA Sequoia II (XK60) 2012: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Sequoia II (XK60) model.

TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) tyre size

Popular maintenance tutorials for TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_)

More manuals for TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_)

Complete guides for changing the Oxygen sensor on different TOYOTA SEQUOIA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
TOYOTA Sequoia II (XK60) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA Sequoia II (XK60) Lambda Sensor replacement - online guide
Tips & tricks for your TOYOTA Sequoia II (XK60)
View more
  • How to change Oxygen sensor on TOYOTA Sequoia II (XK60) 4.7 4WD (UCK65_) - replacement tricks
    Top 6 products for enhancing your car | AUTODOC tips
    3K views
    Published on: 18/11/2021
  • Changing O2 sensor TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) 4.7 (UCK60_) - Replacement Tips
    How to check your head gasket | AUTODOC
    9K views
    Published on: 13/10/2020
  • Maintenance Hacks - TOYOTA Sequoia II (XK60) 5.7 FLEX (USK60_) NOx sensor replacement guide
    Top 5 mistakes when buying car parts
    4K views
    Published on: 10/03/2022
  • Replace Lambda sensors on TOYOTA SEQUOIA (UCK6_, UPK6_, USK6_) - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips
    6K views
    Published on: 26/10/2023

Most commonly replaced car parts on TOYOTA SEQUOIA

Professional manuals for the most common TOYOTA models