When to replace the Lambda Sensor on your TOYOTA CAMRY
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
TOYOTA Camry Estate (_V2_) 3.0 (MCV20_, MCV20) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Camry Estate (_V2_) and other TOYOTA models
Alternative products
How to change Lambda sensor on Camry V20 Estate 3.0 (MCV20_, MCV20) – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – TOYOTA CAMRY Estate (_CV2_, _XV2_). Tools you might need:
Wire brush
WD-40 spray
High-temperature ceramic grease
Electronic spray
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Flat Screwdriver
Long nose pliers
Replacement: lambda sensor – TOYOTA CAMRY Estate (_CV2_, _XV2_). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – TOYOTA CAMRY Estate (_CV2_, _XV2_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Raise the front of the car and secure on supports.
    Step 2
    How to change Lambda Sensor on Camry V20 Estate 1996 - free PDF and video manuals
    Detach the oxygen sensor connector. Use a flat screwdriver. Use long nose pliers.
  2. Step 3
    How to replace TOYOTA Camry Estate (_V2_) 3.0 (MCV20_, MCV20) 1997 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 4
    Camry V20 Estate 2.2 (SXV20_) 1998 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 5
    Changing Lambda Sensor on TOYOTA Camry Estate (_V2_) 2.2 (SXV20_) 1999 by yourself
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  5. Step 6
    How to remove TOYOTA CAMRY 3.0 (MCV20_, MCV20) 2000 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 7
    How to replace Lambda Sensor on TOYOTA Camry Estate (_V2_) 2001: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Camry IV Estate (_V2_) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY TOYOTA Camry Estate (_V2_) Lambda Sensor replacement - online guide
Tips & tricks for your TOYOTA Camry Estate (_V2_)
View more
  • How to change Oxygen sensor on TOYOTA Camry Estate (_V2_) 3.0 (MCV20_, MCV20) - replacement tricks
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Changing O2 sensor Camry V20 Estate 3.0 (MCV20_, MCV20) - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - TOYOTA Camry Estate (_V2_) 2.2 (SXV20_) NOx sensor replacement guide
    Kolbenschmidt plastic gauge overview
  • Replace Lambda sensors on Camry V20 Estate - free video tips
    What to do if your car’s bonnet won’t open | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
TOYOTA Camry Estate (_V2_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME