Disclaimer
How to change lambda sensor on TOYOTA Camry Saloon (_V2_) – replacement guide
downloads:
4
Views:
26
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
TOYOTA Camry Saloon (_V2_) 2.2 (SXV20), TOYOTA Camry Saloon (_V2_) 2.2 (SXV20_), TOYOTA Camry Saloon (_V2_) 3.0 24V (MCV20_, MCV20, MCV10) … View more
The steps may slightly vary depending on the car design.
TOYOTA Camry Saloon (_V2_) 2.2 (SXV20), TOYOTA Camry Saloon (_V2_) 2.2 (SXV20_), TOYOTA Camry Saloon (_V2_) 3.0 24V (MCV20_, MCV20, MCV10) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Lambda Sensor for Camry Saloon (_V2_) and other TOYOTA models
Lambda sensor
Alternative products
Lambda sensor
Wire brush
WD-40 spray
High-temperature ceramic grease
Electronic spray
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Flat Screwdriver
Long nose pliers
Replacement: lambda sensor – TOYOTA CAMRY (_CV2_, _XV2_). AUTODOC experts recommend:
- After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Please note: all work on the car – TOYOTA CAMRY (_CV2_, _XV2_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Raise the front of the car and secure on supports.Step 2
Detach the oxygen sensor connector. Use a flat screwdriver. Use long nose pliers. - Step 3
Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray. - Step 4
Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench. - Step 5
Clean the oxygen sensor mounting seat. Use WD-40 spray. - Step 6
Remove the oxygen sensor. - Step 7
Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Camry IV Saloon (_V2_) model
Popular maintenance tutorials for TOYOTA CAMRY (_CV2_, _XV2_)
Free download PDF
2.08 MB
Free download PDF1.4 MB
Free download PDF2.04 MB
Free download PDF634.88 KB
Free download PDF2.32 MB
Free download PDF2.08 MB
Complete guides for changing the Oxygen sensor on different TOYOTA CAMRY models
Free download PDF1.38 MB
Free download PDF1.37 MB
Free download PDF808.96 KB
Free download PDF1.36 MB
Free download PDF839.68 KB
Free download PDF1 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Camry Saloon (_V2_)
View more
K2 ROTON wheel cleaner overview
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
How I started restoring a driveshaft | Drivetrain restoration – Part 1
Most commonly replaced car parts on TOYOTA CAMRY
Time to replace parts? Get even better deals in our Shop app.
SCAN ME