How to carry out replacement: Lambda Sensor 1.9 TDI Seat Toledo 1m
Disclaimer
Change Seat Toledo 1m 1.6 16V Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on SEAT Toledo II Saloon (1M2) – replacement guide

downloads: 5
Views: 33
Download your free tutorial and fix SEAT Toledo II Saloon (1M2) 1.9 TDI problems yourself Download for free 983.04 KB Lambda Sensor for Seat Toledo 1m Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your SEAT TOLEDO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.8 20V, SEAT Toledo II Saloon (1M2) 1.4 16V, SEAT Toledo II Saloon (1M2) 1.8 20VT, SEAT Toledo II Saloon (1M2) 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Toledo II Saloon (1M2) and other SEAT models
How to change Lambda sensor on Seat Toledo 1m 1.9 TDI – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Toledo II Saloon (1M2) – tips for proper car maintenance
Lambda sensor for Toledo II Saloon (1M2) Petrol (100 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Toledo II Saloon (1M2)
Lambda sensor for Toledo II Saloon (1M2) Petrol (125 hp)
Easy tricks to help you to replace Lambda sensor on Toledo II Saloon (1M2)
Lambda sensor for Toledo II Saloon (1M2) Petrol (75 hp)
Lambda sensor removal & installation, incredibly easy steps for Toledo II Saloon (1M2)
Lambda sensor for Toledo II Saloon (1M2) Petrol (180 hp)
Tools
Replacement: lambda sensor – SEAT TOLEDO II (1M2). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Thread tap
Ratchet wrench
Buy tools
Replacement: lambda sensor – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – SEAT TOLEDO II (1M2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    How to change Lambda Sensor on Seat Toledo 1m 1998 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 3
    How to replace SEAT Toledo II Saloon (1M2) 1.9 TDI 1999 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 4
    Seat Toledo 1m 1.6 16V 2000 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 5
    Changing Lambda Sensor on SEAT Toledo II Saloon (1M2) 1.8 20V 2001 by yourself
    Disconnect the oxygen sensor wiring.
  5. Step 6
    How to remove SEAT TOLEDO 2.3 V5 2002 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Lambda Sensor on SEAT Toledo II Saloon (1M2) 2003: download PDF manuals and video instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Lambda Sensor replacement on Seat Toledo 1m 1.8 20VT 2004 - download illustrated guide
    Remove the oxygen sensor.
  8. Step 9
    Need to know how to renew Lambda Sensor on SEAT TOLEDO 2005? This free workshop manual will help you to do it yourself
    Clean the thread to prepare it for installing a new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model.

Browse tyres

Popular maintenance tutorials for Seat Toledo 1m

More manuals for Seat Toledo 1m

Complete guides for changing the Oxygen sensor on different SEAT TOLEDO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Toledo II Saloon (1M2) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Toledo II Saloon (1M2) Lambda Sensor replacement - online guide
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
  • How to change Oxygen sensor on SEAT Toledo II Saloon (1M2) 1.6 - replacement tricks
    How to shine your tyres | AUTODOC tips
    3K views
    Published on: 07/04/2022
  • Changing O2 sensor Seat Toledo 1m 1.9 TDI - Replacement Tips
    How to remove scratches from a car | AUTODOC tips
    7K views
    Published on: 12/05/2022
  • Maintenance Hacks - SEAT Toledo II Saloon (1M2) 1.6 16V NOx sensor replacement guide
    How to prevent car windows from fogging up | AUTODOC tips
    12K views
    Published on: 04/02/2021
  • Replace Lambda sensors on Seat Toledo 1m - free video tips
    DIY valve cover restoration | AUTODOC tips
    6K views
    Published on: 29/06/2023

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models