When to replace the Glow Plugs on your SEAT TOLEDO
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.9 TDI 4Drive, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Glow Plugs for Toledo II Saloon (1M2) and other SEAT models
Alternative products
How to change Glow plug on Seat Toledo 1m 1.9 TDI – step-by-step instructions for straightforward car repair Glow plug
Tools
Replacement: glow plugs – SEAT TOLEDO II (1M2). Tools you might need:
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Spark plug socket # 10
Fender cover
Replacement: glow plugs – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
  • The replacement procedure is identical for all glow plugs.
  • Wear gloves to protect your hands from hot surfaces.
  • Please note: all work on the car – SEAT TOLEDO II (1M2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Glow Plugs on Seat Toledo 1m 1998 - free PDF and video manuals
    Before getting down to work, start the engine and let it warm up to operating temperature.
  2. Step 4
    Shut off the engine.
    Step 5
    How to replace SEAT Toledo II Saloon (1M2) 1.9 TDI 1999 Glow Plugs - step-by-step manuals and video guides
    Detach the glow plug wiring connectors.
  3. Step 6
    Seat Toledo 1m 1.6 16V 2000 Glow Plugs replacement: free workshop manuals
    Treat the glow plugs. Use WD-40 spray.
  4. Step 7
    Changing Glow Plugs on SEAT Toledo II Saloon (1M2) 1.8 20V 2001 by yourself
    Unscrew the glow plugs. Use the spark plug socket #10. Use a torque wrench.
  5. Step 8
    How to remove SEAT TOLEDO 2.3 V5 2002 Glow Plugs - online easy-to-follow instructions
    Remove the glow plugs.
  6. Step 9
    How to replace Glow Plugs on SEAT Toledo II Saloon (1M2) 2003: download PDF manuals and video instructions
    Treat the glow plugs. Use high-temperature ceramic grease.
    Please note!
    Do not touch the heating element as fingerprints may cause malfunction.
  7. Step 10
    How hard is it to do yourself: Glow Plugs replacement on Seat Toledo 1m 1.8 20VT 2004 - download illustrated guide
    Install new glow plugs to their mounting seats.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo II Saloon (1M2) Glow Plugs replacement - online guide
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
  • How to change Glow plug on SEAT Toledo II Saloon (1M2) 1.6 - replacement tricks
    Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
  • Changing Heater plugs Seat Toledo 1m 1.9 TDI - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
  • Maintenance Hacks - SEAT Toledo II Saloon (1M2) 1.6 16V Heater plug replacement guide
    7 signs of faulty fuel injectors | AUTODOC tips
  • Replace Diesel glow plugs on Seat Toledo 1m - free video tips
    DIY car soundproofing | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo II Saloon (1M2) Glow Plugs replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME