Disclaimer
How to change ignition coil on SEAT Toledo II Saloon (1M2) – replacement guide
downloads:
5
Views:
37
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.6 16V, SEAT Toledo II Saloon (1M2) 1.4 16V … View more
The steps may slightly vary depending on the car design.
SEAT Toledo II Saloon (1M2) 1.6 16V, SEAT Toledo II Saloon (1M2) 1.4 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Toledo II Saloon (1M2) and other SEAT models
Alternative products

Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: ignition coil – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – SEAT TOLEDO II (1M2). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
On the right side, detach the PCV valve hose from the engine cover. - Step 4
Remove the engine cover assembled with the air filter housing.Replacement: ignition coil – SEAT TOLEDO II (1M2). Tip:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Take out the ignition coil from the spark plug well. Use a crowbar.AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 7
Unplug the connectors from the ignition coils. - Step 8
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance. - Step 9
Plug in the connectors of the ignition coils. - Step 10
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.AUTODOC recommends:Replacement: ignition coil – SEAT TOLEDO II (1M2). Follow the installation steps.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model
Popular maintenance tutorials for Seat Toledo 1m
Complete guides for changing the Coil pack on different SEAT TOLEDO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
#TPMS Explained: Why Your Light is On and How to Respond Safely
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Most commonly replaced car parts on SEAT TOLEDO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























