How to carry out replacement: Coolant Flange 1.9 TDI Seat Toledo 1m
Disclaimer
Change Seat Toledo 1m 1.6 16V Coolant Flange yourself – manuals and video tutorials

How to change coolant flange on SEAT Toledo II Saloon (1M2) – replacement guide

downloads: 2
Views: 15
Download your free tutorial and fix SEAT Toledo II Saloon (1M2) 1.9 TDI problems yourself Download for free 1.18 MB Coolant Flange for Seat Toledo 1m Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.9 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Coolant Flange for Toledo II Saloon (1M2) and other SEAT models
How to change Coolant Flange on Seat Toledo 1m 1.9 TDI – step-by-step instructions for straightforward car repair Coolant Flange
How to change Coolant Flange on Toledo II Saloon (1M2) – tips for proper car maintenance
Coolant Flange for Toledo II Saloon (1M2) Diesel (150 hp)
Tools
Replacement: сoolant flange – SEAT TOLEDO II (1M2). Tools you might need:
Torque wrench
Drive socket # 7
Drive socket # 10
Drive socket # 13
Ratchet wrench
Fluid container
Funnel
Fender cover
Buy tools
Replacement: сoolant flange – SEAT TOLEDO II (1M2). Tip from AUTODOC:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Check the coolant condition and replace it if necessary.
  • Inspect the thermostat. Replace it if necessary.
  • All work should be done with the engine stopped.
Replacement: сoolant flange – SEAT TOLEDO II (1M2). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Coolant Flange on Seat Toledo 1m 1998 - free PDF and video manuals
    Unscrew the coolant reservoir cap.
  2. Step 4
    How to replace SEAT Toledo II Saloon (1M2) 1.9 TDI 1999 Coolant Flange - step-by-step manuals and video guides
    Prepare a container for fluids.
  3. Step 5
    Seat Toledo 1m 1.6 16V 2000 Coolant Flange replacement: free workshop manuals
    Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench.
  4. Step 6
    Changing Coolant Flange on SEAT Toledo II Saloon (1M2) 1.8 20V 2001 by yourself
    Detach the coolant hose.
    Replacement: сoolant flange – SEAT TOLEDO II (1M2). Professionals recommend:
    Caution! Coolant may come out from the water pump channels and body.
  5. Step 7
    How to remove SEAT TOLEDO 2.3 V5 2002 Coolant Flange - online easy-to-follow instructions
    Drain the coolant from the engine.
    Replacement: сoolant flange – SEAT TOLEDO II (1M2). Tip from AUTODOC:
    Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole.
  6. Step 8
    How to replace Coolant Flange on SEAT Toledo II Saloon (1M2) 2003: download PDF manuals and video instructions
    Unscrew the thermostat housing fasteners. Use a drive socket #13. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Coolant Flange replacement on Seat Toledo 1m 1.8 20VT 2004 - download illustrated guide
    Remove the thermostat housing.
    AUTODOC recommends:
    Replacement: сoolant flange – SEAT TOLEDO II (1M2). Do not use excessive force when removing the part as this may damage it.
  8. Step 10
    Need to know how to renew Coolant Flange on SEAT TOLEDO 2005? This free workshop manual will help you to do it yourself
    Remove the thermostat.
    Replacement: сoolant flange – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
    Do not apply excessive force when removing the part. Otherwise you may damage it.Caution! Coolant may leak out of the coolant lines and thermostat housing.
  9. Step 11
    Changing of Coolant Flange on Seat Toledo 1m 2006 won't be an issue if you follow this illustrated step-by-step guide
    Install the thermostat.
    AUTODOC recommends:
    Caution! Do not use excessive force during installation. This may damage the fasteners of the car. SEAT TOLEDO II (1M2)
  10. Step 12
    SEAT TOLEDO 1.6 16V Coolant Flange replacement: online guides and video tutorials
    Install a new thermostat housing.
  11. Step 13
    Replacing Coolant Flange on Seat Toledo 1m 1999 1.9 TDI by yourself
    Tighten the thermostat housing fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 13 nm torque.
  12. Step 14
    Toledo II Saloon (1M2) 2.3 V5 2000 Coolant Flange DIY replacement workshop manual
    Attach the coolant hose.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model.

Seat Toledo 1m tyre size

Popular maintenance tutorials for Seat Toledo 1m

More manuals for Seat Toledo 1m

Complete guides for changing the Water outlet on different SEAT TOLEDO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Toledo II Saloon (1M2) Coolant Flange replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Toledo II Saloon (1M2) Coolant Flange replacement - online guide
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
  • How to change Water outlet on SEAT Toledo II Saloon (1M2) 1.6 - replacement tricks
    How to clean an engine bay | AUTODOC
    6K views
    Published on: 11/09/2020
  • Changing Water outlet Seat Toledo 1m 1.9 TDI - Replacement Tips
    How to check your head gasket | AUTODOC
    4K views
    Published on: 03/12/2020
  • Maintenance Hacks - SEAT Toledo II Saloon (1M2) 1.6 16V Water outlet replacement guide
    Checking the starter without removing it | AUTODOC tips
    19K views
    Published on: 01/12/2020
  • Replace Water outlet on Seat Toledo 1m - free video tips
    Replacing your engine cooling fan | AUTODOC tips
    3K views
    Published on: 15/11/2020

Most commonly replaced car parts on SEAT TOLEDO

Professional manuals for the most common SEAT models