How to carry out replacement: Lambda Sensor 1.4 HDi Peugeot Bipper Van
Disclaimer
Change Peugeot Bipper Van 1.4 HDi Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on PEUGEOT BIPPER (AA_) – replacement guide

downloads: 3
Views: 37
Download your free tutorial and fix PEUGEOT BIPPER (AA_) 1.3 HDi 80 / BlueHDi 80 problems yourself Download for free 849.92 KB Lambda Sensor for Peugeot Bipper Van Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your PEUGEOT BIPPER
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT BIPPER (AA_) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for BIPPER (AA_) and other PEUGEOT models
How to change Lambda sensor on Peugeot Bipper Van 1.4 HDi – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Bipper Van – tips for proper car maintenance
Lambda sensor for Bipper Van Petrol (73 hp)
Tools
Replacement: lambda sensor – PEUGEOT BIPPER (AA_). Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – PEUGEOT BIPPER (AA_). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT BIPPER (AA_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot Bipper Van 2008 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT BIPPER (AA_) 1.4 HDi 2009 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot Bipper Van 1.3 HDi 75 2010 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT BIPPER (AA_) 1.3 HDi 80 / BlueHDi 80 2011 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT BIPPER 1.4 HDi 2012 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT BIPPER (AA_) 2013: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT Bipper Van model.

Peugeot Bipper Van tyre size

Popular maintenance tutorials for Peugeot Bipper Van

More manuals for Peugeot Bipper Van

Complete guides for changing the Oxygen sensor on different PEUGEOT BIPPER models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT BIPPER (AA_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT BIPPER (AA_) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT BIPPER (AA_)
View more
  • How to change Oxygen sensor on PEUGEOT BIPPER (AA_) 1.4 - replacement tricks
    What to do if the ABS light comes on | AUTODOC tips
    6K views
    Published on: 11/03/2021
  • Changing O2 sensor Peugeot Bipper Van 1.4 HDi - Replacement Tips
    How to clean an engine bay | AUTODOC
    6K views
    Published on: 11/09/2020
  • Maintenance Hacks - PEUGEOT BIPPER (AA_) 1.3 HDi 75 NOx sensor replacement guide
    DIY alternator repair | AUTODOC tips
    1M views
    Published on: 30/11/2022
  • Replace Lambda sensors on Peugeot Bipper Van - free video tips
    How to prevent car windows from fogging up | AUTODOC tips
    12K views
    Published on: 04/02/2021

Most commonly replaced car parts on PEUGEOT BIPPER

Professional manuals for the most common PEUGEOT models