The oil level should be between the Min and Max marks.
Step 38
Tighten the oil filler cap.
Step 39
Run the engine for a few minutes. After the oil pressure warning light goes out, stop the engine.
Step 40
Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.
AUTODOC recommends:
The oil level should be between the Min and Max marks.Make sure that the oil filler cap is properly tightened.Check the threaded plug of the drainage hole and the oil filter seal for tightness. If necessary, carefully tighten them up.
Note that oil pressure warning light, which indicates insufficient pressure in the lubrication system, may be on for a longer time than usual. After a few seconds, the oil will fill all the channels, and the light will go out. To protect the environment from pollution, be sure to dispose of the used filters at special collection points.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for Peugeot Bipper Van
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your PEUGEOT BIPPER (AA_)
View more
Causes of a worn car boot damper | AUTODOC
Headlight Restoration | AUTODOC tips
How to find and change a fuse | AUTODOC
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Most commonly replaced car parts on PEUGEOT BIPPER