When to replace the Lambda Sensor on your PEUGEOT 407
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT 407 (6D_) 1.8 (6D6FZB), PEUGEOT 407 (6D_) 2.0 Bioflex (6DRFJB), PEUGEOT 407 (6D_) 1.8 16V (6D6FYC), PEUGEOT 407 (6D_) 2.0 16V (6DRFJC, 6DRFJE, 6DRFJF), PEUGEOT 407 (6D_) 2.2 16V (6D3FYH, 6D3FYE), PEUGEOT 407 (6D_) 2.0 Flex (6DRFJB), PEUGEOT 407 (6D_) 2.0 16V (6DRFJC, 6DRFJF) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for 407 (6D_) and other PEUGEOT models
Alternative products
How to change Lambda sensor on Peugeot 407 Saloon 2.0 HDi (6DRHRH, 6DRHRE, 6DRHRG, 6DRHRJ) – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – PEUGEOT 407 (6D_). Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT 407 (6D_). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT 407 (6D_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot 407 Saloon 2004 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT 407 (6D_) 2.0 HDi (6DRHRH, 6DRHRE, 6DRHRG, 6DRHRJ) 2005 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot 407 Saloon 1.6 HDi (6D9HZC, 6D9HYC) 2006 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT 407 (6D_) 1.8 (6D6FZB) 2007 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT 407 2.0 HDi (6DRHRH) 2008 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT 407 (6D_) 2009: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 407 Saloon model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 407 (6D_) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT 407 (6D_)
View more
  • How to change Oxygen sensor on PEUGEOT 407 (6D_) 2.0 (6DRFNB, 6DRFNE) - replacement tricks
    How to repair a bumper yourself | AUTODOC tips
  • Changing O2 sensor Peugeot 407 Saloon 2.0 HDi (6DRHRH, 6DRHRE, 6DRHRG, 6DRHRJ) - Replacement Tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
  • Maintenance Hacks - PEUGEOT 407 (6D_) 1.6 HDi (6D9HZC, 6D9HYC) NOx sensor replacement guide
    Cold starts | 5 mistakes that wreck your car
  • Replace Lambda sensors on Peugeot 407 Saloon - free video tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 407 (6D_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME