When to replace the Lambda Sensor on your AUDI A3
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
AUDI A3 Sportback (8PA) 1.6 E-Power, AUDI A3 Sportback (8PA) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for A3 Sportback (8PA) and other AUDI models
Tools
Replacement: lambda sensor – AUDI A3 Sportback (8PA). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Flare nut wrench #22
Clip removal tool
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – AUDI A3 Sportback (8PA). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – AUDI A3 Sportback (8PA) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Audi A3 8P Sportback 2004 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace AUDI A3 Sportback (8PA) 2.0 TDI 16V 2005 Lambda Sensor - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 6
    Audi A3 8P Sportback 1.9 TDI 2006 Lambda Sensor replacement: free workshop manuals
    Disconnect the oxygen sensor wiring. Use a clip removal tool.
  4. Step 7
    Changing Lambda Sensor on AUDI A3 Sportback (8PA) 1.6 TDI 2007 by yourself
    Detach the oxygen sensor connector. Use a clip removal tool.
  5. Step 8
    How to remove AUDI A3 1.6 2008 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 9
    How to replace Lambda Sensor on AUDI A3 Sportback (8PA) 2009: download PDF manuals and video instructions
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  7. Step 10
    How hard is it to do yourself: Lambda Sensor replacement on Audi A3 8P Sportback 1.4 TFSI 2010 - download illustrated guide
    Remove the oxygen sensor.
  8. Step 11
    Need to know how to renew Lambda Sensor on AUDI A3 2011? This free workshop manual will help you to do it yourself
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  9. Step 12
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 13
    Changing of Lambda Sensor on Audi A3 8P Sportback 2012 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
  10. Step 14
    AUDI A3 2.0 TDI quattro Lambda Sensor replacement: online guides and video tutorials
    Tighten the oxygen sensor fastener. Use a flare nut spanner #22. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A3 Sportback (8PA) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A3 Sportback (8PA) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A3 Sportback (8PA) Lambda Sensor replacement - online guide
Tips & tricks for your AUDI A3 Sportback (8PA)
View more
  • How to change Oxygen sensor on AUDI A3 Sportback (8PA) 2.0 TDI - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Changing O2 sensor Audi A3 8P Sportback 2.0 TDI 16V - Replacement Tips
    Causes of a worn car boot damper | AUTODOC
  • Maintenance Hacks - AUDI A3 Sportback (8PA) 1.9 TDI NOx sensor replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Lambda sensors on Audi A3 8P Sportback - free video tips
    Replacing your engine cooling fan | AUTODOC tips

Professional manuals for the most common AUDI models