When to replace the Lambda Sensor on your AUDI A1
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
AUDI A1 Hatchback (8X1, 8XK) 1.4 TFSI, AUDI A1 Hatchback (8X1, 8XK) 1.4 TFSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for A1 Hatchback (8X1, 8XK) and other AUDI models
Tools
Replacement: lambda sensor – AUDI A1 (8X1, 8XF). Tools you might need:
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – AUDI A1 (8X1, 8XF). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – AUDI A1 (8X1, 8XF) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Audi A1 8x 2010 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace AUDI A1 Hatchback (8X1, 8XK) 1.6 TDI 2011 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 6
    Audi A1 8x 1.2 TFSI 2012 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 7
    Changing Lambda Sensor on AUDI A1 Hatchback (8X1, 8XK) 2.0 TDI 2013 by yourself
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  5. Step 8
    How to remove AUDI A1 1.4 TDI 2014 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 9
    How to replace Lambda Sensor on AUDI A1 Hatchback (8X1, 8XK) 2015: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  7. Step 10
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 11
    How hard is it to do yourself: Lambda Sensor replacement on Audi A1 8x 1.0 TFSI 2016 - download illustrated guide
    Install the new oxygen sensor.
  8. Step 12
    Need to know how to renew Lambda Sensor on AUDI A1 2017? This free workshop manual will help you to do it yourself
    Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A1 Hatchback (8X1, 8XK) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A1 Hatchback (8X1, 8XK) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A1 Hatchback (8X1, 8XK) Lambda Sensor replacement - online guide
Tips & tricks for your AUDI A1 Hatchback (8X1, 8XK)
View more
  • How to change Oxygen sensor on AUDI A1 Hatchback (8X1, 8XK) 1.4 TFSI - replacement tricks
    How and why to check your oil | AUTODOC tips
  • Changing O2 sensor Audi A1 8x 1.6 TDI - Replacement Tips
    How to remove rust | AUTODOC tips
  • Maintenance Hacks - AUDI A1 Hatchback (8X1, 8XK) 1.2 TFSI NOx sensor replacement guide
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Replace Lambda sensors on Audi A1 8x - free video tips
    DIY brake caliper restoration | AUTODOC tips

Professional manuals for the most common AUDI models