When to replace the Ignition Leads on your SEAT TOLEDO
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
SEAT TOLEDO I (1L) 1.8 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for TOLEDO I (1L) and other SEAT models
Alternative products
How to change Ignition Cable Kit on Seat Toledo 1L 1.9 TDI – step-by-step instructions for straightforward car repair Ignition Cable Kit
Tools
Replacement: ignition leads – SEAT TOLEDO I (1L). Tools you might need:
Pincers
Fender cover
Replacement: ignition leads – SEAT TOLEDO I (1L). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: ignition leads – SEAT TOLEDO I (1L). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on Seat Toledo 1L 1991 - free PDF and video manuals
    Disconnect the high voltage wire.
    Replacement: ignition leads – SEAT TOLEDO I (1L). Tip:
    Wear dielectric gloves.
  2. Step 4
    How to replace SEAT TOLEDO I (1L) 1.9 TDI 1992 Ignition Leads - step-by-step manuals and video guides
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  3. Step 5
    Seat Toledo 1L 1.6 i 1993 Ignition Leads replacement: free workshop manuals
    Disconnect the spark plug wires from the spark plugs. Use pincers.
    Replacement: ignition leads – SEAT TOLEDO I (1L). AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.
  4. Step 6
    Changing Ignition Leads on SEAT TOLEDO I (1L) 1.8 i 1994 by yourself
    Disconnect the spark plug wires from the distributor cap.
    Replacement: ignition leads – SEAT TOLEDO I (1L). AUTODOC experts recommend:
    Be careful to avoid damaging spark plug wires.
  5. Step 7
    How to remove SEAT TOLEDO 2.0 i 1995 Ignition Leads - online easy-to-follow instructions
    Connect new spark plug wires to the distributor cap.
    Replacement: ignition leads – SEAT TOLEDO I (1L). AUTODOC recommends:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo I Hatchback (1L) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT TOLEDO I (1L) Ignition Leads replacement - online guide
Tips & tricks for your SEAT TOLEDO I (1L)
View more
  • How to change Plug leads on SEAT TOLEDO I (1L) 1.9 TD - replacement tricks
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
  • Changing Spark plug leads Seat Toledo 1L 1.9 TDI - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
  • Maintenance Hacks - SEAT TOLEDO I (1L) 1.6 i Spark plug wire replacement guide
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
  • Replace Ignition cable set on Seat Toledo 1L - free video tips
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT TOLEDO I (1L) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME