Disclaimer
How to change serpentine belt on SEAT TOLEDO I (1L) – replacement guide
downloads:
1
Views:
47
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 16V, SEAT TOLEDO I (1L) 1.9 D, SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 16V, SEAT TOLEDO I (1L) 2.0 i, SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 i, SEAT TOLEDO I (1L) 1.9 TDI, SEAT TOLEDO I (1L) 1.9 TDI, SEAT TOLEDO I (1L) 1.9 D … View more
The steps may slightly vary depending on the car design.
SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 16V, SEAT TOLEDO I (1L) 1.9 D, SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 16V, SEAT TOLEDO I (1L) 2.0 i, SEAT TOLEDO I (1L) 1.6 i, SEAT TOLEDO I (1L) 1.8 i, SEAT TOLEDO I (1L) 1.9 TDI, SEAT TOLEDO I (1L) 1.9 TDI, SEAT TOLEDO I (1L) 1.9 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for TOLEDO I (1L) and other SEAT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 13
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Phillips screwdriver
Crow bar
Replacement: serpentine belt – SEAT TOLEDO I (1L). Tip:
- All work should be done with the engine stopped.
Replacement: serpentine belt – SEAT TOLEDO I (1L). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the front of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO I (1L) - Step 7
Remove the wheel. - Step 8
Unscrew the wheel arch cover fasteners. Use a Phillips screwdriver. - Step 9
Remove the wheel arch cover. - Step 10
Clean the fasteners of the hydraulic power steering pump. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the fasteners of the hydraulic power steering pump. Use a drive socket #13. Use a drive socket #16. Use a ratchet wrench. - Step 12
Loosen the V belt. - Step 13
Remove the V belt. - Step 14
Clean the alternator fasteners. Use a wire brush. Use WD-40 spray. - Step 15
Loosen the alternator fasteners. Use a drive socket #13. Use a drive socket #16. Use a ratchet wrench. - Step 16
Remove the V-ribbed belt. - Step 17
Install the V-ribbed belt.Replacement: serpentine belt – SEAT TOLEDO I (1L). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 18
Place the V-ribbed belt on the alternator. Use a crowbar.AUTODOC recommends:Make sure that the V-ribbed belt is properly tensioned.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Toledo I Hatchback (1L) model
Popular maintenance tutorials for Seat Toledo 1L
Complete guides for changing the Alternator belt on different SEAT TOLEDO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT TOLEDO I (1L)
View more
How to inspect and troubleshoot your car heater when it’s not working
What to do if your car’s bonnet won’t open | AUTODOC tips
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Most commonly replaced car parts on SEAT TOLEDO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























