How to carry out replacement: Ignition Leads 1.9 TDI Seat Cordoba 6K1
Disclaimer
Change Seat Cordoba 6K1 1.9 SDI Ignition Leads yourself – manuals and video tutorials

How to change ignition leads on SEAT Cordoba Saloon (6K1, 6K2) – replacement guide

downloads: 1
Views: 26
Download your free tutorial and fix SEAT Cordoba Saloon (6K1, 6K2) 1.4 i problems yourself Download for free 1.21 MB Ignition Leads for Seat Cordoba 6K1 Shop now
Leave a comment Open in a new tab
When to replace the Ignition Leads on your SEAT CORDOBA
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
SEAT Cordoba Saloon (6K1, 6K2) 1.4, SEAT Cordoba Saloon (6K1, 6K2) 1.6 i, SEAT Cordoba Saloon (6K1, 6K2) 1.0 i, SEAT Cordoba Saloon (6K1, 6K2) 1.6 i, SEAT Cordoba Saloon (6K1, 6K2) 1.4 i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for Cordoba Saloon (6K1, 6K2) and other SEAT models
Alternative products
How to change Ignition Cable Kit on Seat Cordoba 6K1 1.9 TDI – step-by-step instructions for straightforward car repair Ignition Cable Kit
Tools
Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). Tools you might need:
Long nose pliers
Flat screwdriver
Phillips Screwdriver
Microfibre towel
Fender cover
Buy tools
Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). Recommended sequence of steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on Seat Cordoba 6K1 1993 - free PDF and video manuals
    Unscrew the air filter housing fasteners. Use a Phillips screwdriver.
  2. Step 4
    How to replace SEAT Cordoba Saloon (6K1, 6K2) 1.9 TDI 1994 Ignition Leads - step-by-step manuals and video guides
    Remove the air filter housing.
  3. Step 5
    Seat Cordoba 6K1 1.4 i 1995 Ignition Leads replacement: free workshop manuals
    Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
  4. Step 6
    Changing Ignition Leads on SEAT Cordoba Saloon (6K1, 6K2) 1.6 i 1996 by yourself
    Detach the spark plug wire bracket. Use a flat screwdriver.
  5. Step 7
    How to remove SEAT CORDOBA 1.4 16V 1997 Ignition Leads - online easy-to-follow instructions
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  6. Step 8
    How to replace Ignition Leads on SEAT Cordoba Saloon (6K1, 6K2) 1998: download PDF manuals and video instructions
    Disconnect the spark plug wires from the distributor cap.
    Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). Tip:
    Be careful to avoid damaging spark plug wires.
  7. Step 9
    How hard is it to do yourself: Ignition Leads replacement on Seat Cordoba 6K1 1.9 TDI 1999 - download illustrated guide
    Disconnect the spark plug wires from the spark plugs. Use long nose pliers.
    Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  8. Step 10
    Need to know how to renew Ignition Leads on SEAT CORDOBA 2000? This free workshop manual will help you to do it yourself
    Disconnect the high voltage wire.
  9. Step 11
    Changing of Ignition Leads on Seat Cordoba 6K1 2001 won't be an issue if you follow this illustrated step-by-step guide
    Connect new spark plug wires to the distributor cap.
    Replacement: ignition leads – SEAT CORDOBA (6K1, 6K2). AUTODOC recommends:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Córdoba I Saloon (6K1, 6K2) model

Seat Cordoba 6K1 tyre size

Popular maintenance tutorials for Seat Cordoba 6K1

More manuals for Seat Cordoba 6K1

Complete guides for changing the Plug leads on different SEAT CORDOBA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Cordoba Saloon (6K1, 6K2) Ignition Leads replacement - online guide
Tips & tricks for your SEAT Cordoba Saloon (6K1, 6K2)
View more
  • How to change Plug leads on SEAT Cordoba Saloon (6K1, 6K2) 1.9 SDI - replacement tricks
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022
  • Changing Spark plug leads Seat Cordoba 6K1 1.9 TDI - Replacement Tips
    Engine Overheating? Replace Your Cooling Fan to Fix It
    7K views
    Published on: 15/11/2020
  • Maintenance Hacks - SEAT Cordoba Saloon (6K1, 6K2) 1.4 i Spark plug wire replacement guide
    Initial Car Inspection: What to Check Before You Buy
    5K views
    Published on: 24/10/2020
  • Replace Ignition cable set on Seat Cordoba 6K1 - free video tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    14K views
    Published on: 15/06/2023

Most commonly replaced car parts on SEAT CORDOBA

Professional manuals for the most common SEAT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Cordoba Saloon (6K1, 6K2) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME