Disclaimer
How to change ignition leads on SEAT Ibiza II (6K1) – replacement guide
downloads:
11
Views:
163
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
SEAT Ibiza II (6K1) 1.4, SEAT Ibiza II (6K1) 1.6 i, SEAT Ibiza II (6K1) 1.0 i, SEAT Ibiza II (6K1) 1.4 i, SEAT Ibiza II (6K1) 1.6 i … View more
The steps may slightly vary depending on the car design.
SEAT Ibiza II (6K1) 1.4, SEAT Ibiza II (6K1) 1.6 i, SEAT Ibiza II (6K1) 1.0 i, SEAT Ibiza II (6K1) 1.4 i, SEAT Ibiza II (6K1) 1.6 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Leads for Ibiza II (6K1) and other SEAT models
Alternative products

Long nose pliers
Flat screwdriver
Phillips Screwdriver
Microfibre towel
Fender cover
Replacement: ignition leads – SEAT IBIZA II (6K1). Tip from AUTODOC:
- All work should be done with the engine stopped.
Replacement: ignition leads – SEAT IBIZA II (6K1). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the air filter housing fasteners. Use a Phillips screwdriver. - Step 4
Remove the air filter housing. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Detach the spark plug wire bracket. Use a flat screwdriver. - Step 7
Make marks on the distributor cap to indicate the installation order of the spark plug wires. - Step 8
Disconnect the spark plug wires from the distributor cap.Replacement: ignition leads – SEAT IBIZA II (6K1). Tip:Be careful to avoid damaging spark plug wires. - Step 9
Disconnect the spark plug wires from the spark plugs. Use long nose pliers.Replacement: ignition leads – SEAT IBIZA II (6K1). Tip from AUTODOC experts:Be careful to avoid damaging spark plug wires. - Step 10
Disconnect the high voltage wire. - Step 11
Connect new spark plug wires to the distributor cap.Replacement: ignition leads – SEAT IBIZA II (6K1). AUTODOC recommends:Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Ibiza II (6K1) model
Popular maintenance tutorials for Seat Ibiza 6k
Complete guides for changing the Plug leads on different SEAT IBIZA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Ibiza II (6K1)
View more
Top 5 brake repair mistakes | AUTODOC tips
Deep interior cleaning | Car transformation by detailing
Why Checking Your Oil is Crucial for Engine Performance
When, why, and how to change engine oil | AUTODOC tips
Most commonly replaced car parts on SEAT IBIZA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















