Disclaimer
How to change ignition coil on VW Caddy II Van (9K9A) – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
VW Caddy II Van (9K9A) 60 1.4, VW Caddy II Van (9K9A) 75 1.6, VW Caddy II Van (9K9A) 1.4, VW Caddy II Van (9K9A) 75 1.6 … View more
The steps may slightly vary depending on the car design.
VW Caddy II Van (9K9A) 60 1.4, VW Caddy II Van (9K9A) 75 1.6, VW Caddy II Van (9K9A) 1.4, VW Caddy II Van (9K9A) 75 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Caddy II Van (9K9A) and other VW models
Electronic spray
Torque wrench
Combination spanner #10
Drive socket # 13
HEX bit No.H5
HEX bit No.H6
Ratchet wrench
Microfibre towel
Fender cover
Replacement: ignition coil – VW CADDY II Box (9K9A). Tip from AUTODOC experts:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – VW CADDY II Box (9K9A). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the secondary air pump hoses. - Step 4
Cover the secondary air pump channels with a microfibre cloth to prevent dust and dirt from getting inside. - Step 5
Detach the secondary air pump connector. - Step 6
Unscrew the fasteners connecting the secondary air pump to its bracket. Use a combination spanner #10. - Step 7
Remove the secondary air pump. - Step 8
Unscrew the fastener of the secondary air pump bracket. Use HEX No.H6. Use a drive socket #13. Use a ratchet wrench. - Step 9
Remove the secondary air pump bracket. - Step 10
Detach the connector from the ignition coil. - Step 11
Disconnect the spark plug wires from the ignition coil.Replacement: ignition coil – VW CADDY II Box (9K9A). Tip:Remember the sequence of the spark plug wires connectors. - Step 12
Unscrew the ignition coil bracket. Use HEX No.H5. Use a ratchet wrench. - Step 13
Remove the ignition coil. - Step 14
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance. - Step 15
Treat the spark plug wire connectors. Use electronic spray. - Step 16
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place. - Step 17
Tighten the ignition coil fastening. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Caddy II Van (9K9A) model.
Popular maintenance tutorials for VW Caddy 2 Van
Free download PDF
1.2 MB
Free download PDF890.88 KB
Free download PDF1.18 MB
Free download PDF6.7 MB
Free download PDF1.36 MB
Free download PDF1003.52 KB
Complete guides for changing the Coil pack on different VW CADDY models
Free download PDF1.8 MB
Free download PDF1.84 MB
Free download PDF1.63 MB
Free download PDF1.62 MB
Free download PDF1.98 MB
Free download PDF2.17 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your VW Caddy II Van (9K9A)
View more
How to replace a wheel stud | AUTODOC tips
TOP 4 car cleaning products | AUTODOC tips
How to fix your car with AUTODOC CLUB
Top 5 brake repair mistakes | AUTODOC tips
