
Disclaimer
How to change serpentine belt on SEAT Toledo II Saloon (1M2) – replacement guide
downloads:
6
Views:
82

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT Toledo II Saloon (1M2) 1.9 TDI 4Drive, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SEAT Toledo II Saloon (1M2) 1.9 TDI 4Drive, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI, SEAT Toledo II Saloon (1M2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Toledo II Saloon (1M2) and other SEAT models
Serpentine belt
Alternative products

Combination spanner #16
Torx bit T25
Fender cover
Replacement: serpentine belt – SEAT TOLEDO II (1M2). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – SEAT TOLEDO II (1M2). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Unscrew and remove the wheel arch cover fasteners. Use Torx T25.
- Step 5Remove the wheel arch cover.
- Step 6Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 7Remove the V-ribbed belt.AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 8Return the tensioner pulley to its initial position.
- Step 9Install the V-ribbed belt.Replacement: serpentine belt – SEAT TOLEDO II (1M2). Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly. Make sure that the V-ribbed belt is properly tensioned.
- Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 11Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Toledo II Saloon (1M2) model
Popular maintenance tutorials for Seat Toledo 1m
Complete guides for changing the Alternator belt on different SEAT TOLEDO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Toledo II Saloon (1M2)
View more
- Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
- 5 Essential Tips for beginner drivers: Avoid Common Mistakes
- How to remove rust | AUTODOC tips
- BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Most commonly replaced car parts on SEAT TOLEDO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME