
Disclaimer
How to change ignition coil on SEAT Alhambra II (710, 711) – replacement guide
downloads:
2
Views:
16
Important!
This replacement procedure can be used for:
SEAT Alhambra (710, 711) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
SEAT Alhambra (710, 711) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Alhambra (710, 711) and other SEAT models
Ignition coil
Alternative products

Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: ignition coil – SEAT ALHAMBRA (710, 711). AUTODOC experts recommend:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – SEAT ALHAMBRA (710, 711). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3On the right side, detach the PCV valve hose from the engine cover.
- Step 4Remove the engine cover assembled with the air filter housing.Replacement: ignition coil – SEAT ALHAMBRA (710, 711). Tip:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 5Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 6Take out the ignition coil from the spark plug well. Use a crowbar.AUTODOC recommends:Remember the sequence of steps for ignition coil demounting.
- Step 7Unplug the connectors from the ignition coils.
- Step 8Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
- Step 9Plug in the connectors of the ignition coils.
- Step 10Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.AUTODOC recommends:Replacement: ignition coil – SEAT ALHAMBRA (710, 711). Follow the installation steps.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Alhambra II (710, 711) model
Popular maintenance tutorials for SEAT Alhambra 7N
Complete guides for changing the Coil pack on different SEAT ALHAMBRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Alhambra (710, 711)
View more
- Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
- Understanding Airbag Light Warnings | Essential Tips for Car Safety
- What to do if your car’s bonnet won’t open | AUTODOC tips
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
Most commonly replaced car parts on SEAT ALHAMBRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME