When to replace the Poly V-Belt on your SEAT ALHAMBRA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT Alhambra (710, 711) 2.0 TDI, SEAT Alhambra (710, 711) 2.0 TDI, SEAT Alhambra (710, 711) 2.0 TDI, SEAT Alhambra (710, 711) 2.0 TDI 4Drive, SEAT Alhambra (710, 711) 2.0 TDI, SEAT Alhambra (710, 711) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Alhambra (710, 711) and other SEAT models
Alternative products
How to change Serpentine belt on SEAT Alhambra 7N 2.0 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – SEAT ALHAMBRA (710, 711). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – SEAT ALHAMBRA (710, 711). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT ALHAMBRA (710, 711)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on SEAT Alhambra 7N 2010 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace SEAT Alhambra (710, 711) 2.0 TDI 2011 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – SEAT ALHAMBRA (710, 711). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    SEAT Alhambra 7N 2.0 TDI 4Drive 2012 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – SEAT ALHAMBRA (710, 711). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Alhambra II (710, 711) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Alhambra (710, 711) Poly V-Belt replacement - online guide
Tips & tricks for your SEAT Alhambra (710, 711)
View more
  • How to change Alternator belt on SEAT Alhambra (710, 711) 1.4 TSI - replacement tricks
    Why Is the Windscreen Washer Not Spraying? Solution
  • Changing Auxiliary belt SEAT Alhambra 7N 2.0 TDI - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
  • Maintenance Hacks - SEAT Alhambra (710, 711) 2.0 TDI 4Drive Poly V-belt replacement guide
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
  • Replace Drive belt on SEAT Alhambra 7N - free video tips
    3 essential tips for choosing summer tyres | Get ready for warmer weather
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Alhambra (710, 711) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME