Disclaimer
How to change ignition coil on MERCEDES-BENZ E-Class Saloon (W124) – replacement guide
downloads:
17
Views:
351
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Saloon (W124) E 500 (124.036), MERCEDES-BENZ E-Class Saloon (W124) E 60 AMG (124.036), MERCEDES-BENZ E-Class Saloon (W124) E 300 4-matic (124.230), MERCEDES-BENZ E-Class Saloon (W124) E 500 (124.036) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Saloon (W124) E 500 (124.036), MERCEDES-BENZ E-Class Saloon (W124) E 60 AMG (124.036), MERCEDES-BENZ E-Class Saloon (W124) E 300 4-matic (124.230), MERCEDES-BENZ E-Class Saloon (W124) E 500 (124.036) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for E-Class Saloon (W124) and other MERCEDES-BENZ models
Alternative products

Wire brush
High-temperature anti-seize lubricant
Dielectric grease
Torque wrench
Combination spanner #10
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Phillips screwdriver
Crow bar
Fender cover
Replacement: ignition coil – MERCEDES-BENZ E-CLASS (W124). Tip from AUTODOC:
- Warning! Shut down the engine before starting any work – MERCEDES-BENZ E-CLASS (W124).
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the earth cable terminal from the battery. Use a combination spanner #10. - Step 4
Unscrew the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench. - Step 5
Remove the fastening bolts. - Step 6
Remove the inlet pipe. - Step 7
Remove the ignition coil cover. - Step 8
Disconnect the high tension cable from the ignition coil. - Step 9
Unscrew the fasteners of the ignition coil terminals. Use a drive socket #10. Use a ratchet wrench. - Step 10
Disconnect the terminals from the ignition coil. - Step 11
Unscrew the ignition coil fasteners. Use a combination spanner #10. - Step 12
Remove the ignition coil. - Step 13
Install a new ignition coil. - Step 14
Screw in the ignition coil fasteners. Use a combination spanner #10. - Step 15
Connect the terminals to the ignition coil. - Step 16
Treat the ignition coil terminals. Use dielectric grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Saloon (W124) model
Popular maintenance tutorials for Mercedes E Class W124
Complete guides for changing the Coil pack on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Saloon (W124)
View more
How to get your motorcycle ready for spring
What to do if the ABS light comes on: DIY Diagnostics Tips
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
5 possible reasons why your car heater isn't working
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















