Disclaimer
How to change ignition coil on FORD C-Max II (DXA/CB7, DXA/CEU) – replacement guide
downloads:
10
Views:
132
Important!
This replacement procedure can be used for:
FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Flexifuel, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG … View more
The steps may slightly vary depending on the car design.
FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 EcoBoost, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Flexifuel, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 Ti, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG, FORD C-Max II (DXA/CB7, DXA/CEU) 1.6 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for C-Max II (DXA/CB7, DXA/CEU) and other FORD models
Alternative products

Electronic spray
Torque wrench
Torx bit T20
Ratchet wrench
Fender cover
Replacement: ignition coil – FORD C-MAX II. Tip from AUTODOC experts:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – FORD C-MAX II. Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: ignition coil – FORD C-MAX II. Do not use excessive force when removing the part as this may damage it. - Step 4
Detach the connector from the ignition coil. - Step 5
Make marks to indicate the order of installation of the spark plug wires. - Step 6
Disconnect the spark plug wires from the ignition coil.AUTODOC recommends:Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires. - Step 7
Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench. - Step 8
Remove the ignition coil. - Step 9
Install a new ignition coil. - Step 10
Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD C-Max II (DXA/CB7, DXA/CEU) model
Popular maintenance tutorials for Ford C Max 2
Complete guides for changing the Coil pack on different FORD C-MAX models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD C-Max II (DXA/CB7, DXA/CEU)
View more
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
DIY vehicle AC compressor restoration
Top 5 brake repair mistakes | AUTODOC tips
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Most commonly replaced car parts on FORD C-MAX
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























