This replacement procedure can be used for:
FORD B-MAX (JK) 1.6 Ti, FORD B-MAX (JK) 1.4, FORD B-MAX (JK) 1.4 LPG, FORD B-MAX (JK) 1.4 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Replacement: ignition coil – FORD B-MAX (JK). Tools you might need:
Electronic spray
Torque wrench
Torx bit T20
Ratchet wrench
Fender cover
Replacement: ignition coil – FORD B-MAX (JK). Tip from AUTODOC experts:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – FORD B-MAX (JK). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Ford B-Max JK 2012 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – FORD B-MAX (JK). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace FORD B-MAX (JK) 1.0 EcoBoost 2013 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Ford B-Max JK 1.6 TDCi 2014 Ignition Coil replacement: free workshop manuals
    Make marks to indicate the order of installation of the spark plug wires.
  4. Step 6
    Changing Ignition Coil on FORD B-MAX (JK) 1.6 Ti 2015 by yourself
    Disconnect the spark plug wires from the ignition coil.
    AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  5. Step 7
    How to remove FORD B-MAX 1.4 LPG 2016 Ignition Coil - online easy-to-follow instructions
    Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench.
  6. Step 8
    How to replace Ignition Coil on FORD B-MAX (JK) 2017: download PDF manuals and video instructions
    Remove the ignition coil.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on Ford B-Max JK 1.0 EcoBoost 2018 - download illustrated guide
    Install a new ignition coil.
  8. Step 10
    Need to know how to renew Ignition Coil on FORD B-MAX 2019? This free workshop manual will help you to do it yourself
    Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD B-Max (JK8) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD B-MAX (JK) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY FORD B-MAX (JK) Ignition Coil replacement - online guide
Tips & tricks for your FORD B-MAX (JK)
View more
  • How to change Coil pack on FORD B-MAX (JK) 1.5 TDCi - replacement tricks
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Ignition coil pack Ford B-Max JK 1.0 EcoBoost - Replacement Tips
    What to do if the TPMS light is on | AUTODOC tips
  • Maintenance Hacks - FORD B-MAX (JK) 1.6 TDCi Ignition coils replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Coil packs on Ford B-Max JK - free video tips
    5 causes of turbocharger failure | AUTODOC tips