
Disclaimer
How to change glow plugs on MERCEDES-BENZ E-Class Platform / Chassis (VF210) – replacement guide
downloads:
2
Views:
174

Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for E-Class Platform / Chassis (VF210) and other MERCEDES-BENZ models
Glow plug
Alternative products

WD-40 spray
All-purpose cleaning spray
Dielectric grease
High-temperature ceramic grease
Torque wrench
Spark plug socket # 10
Drive socket # Е11
Ratchet wrench
Needle nose pliers
Fender cover
Replacement: glow plugs – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Tip from AUTODOC:
- The replacement procedure is identical for all glow plugs.
- Wear gloves to protect your hands from hot surfaces.
- Warning! Shut down the engine before starting any work – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210).
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Clean dirt, dust and debris from inside the spark plug wells.
- Step 4Treat the glow plugs. Use WD-40 spray.
- Step 5If the glow plugs are difficult to unscrew, start the engine and let it warm up to operating temperature. This will make them easier to remove.Replacement: glow plugs – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Tip:Wear gloves to protect your hands from hot surfaces.
- Step 6Shut off the engine.Step 7Unscrew the fuel hose fastener. Use a drive socket #Е11. Use a ratchet wrench.
- Step 8Disconnect the fuel return line hose.
- Step 9Blank off the fuel return line.
- Step 10Detach the glow plug wiring connectors. Use needle nose pliers.
- Step 11Clean dirt, dust and debris from inside the spark plug wells.
- Step 12Unscrew the glow plugs. Use the spark plug socket #10. Use a torque wrench.Replacement: glow plugs – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). AUTODOC recommends:The glow plugs can get stuck over time and break apart when removed.Use a torque wrench to loosen the parts to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still won't unscrew, you need to consult a professional: breakage of the parts can result in costly engine repairs.
- Step 13Remove the glow plugs. Use needle nose pliers.
- Step 14Treat the glow plugs. Use high-temperature ceramic grease.
- Step 15Install new glow plugs to their mounting seats. Use needle nose pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Platform / Chassis (VF210) model
Popular maintenance tutorials for MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210)
Complete guides for changing the Glow plug on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Platform / Chassis (VF210)
View more
- #DIY guide: Changing your car's color with a spray can | AUTODOC tips
- How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
- Initial Car Inspection: What to Check Before You Buy
- Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME