Disclaimer
How to change mass air flow sensor on MERCEDES-BENZ E-Class Platform / Chassis (VF210) – replacement guide
downloads:
1
Views:
17
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Mass Air Flow Sensor for E-Class Platform / Chassis (VF210) and other MERCEDES-BENZ models
Mass air flow sensor
Alternative products
Mass air flow sensor
Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: mass air flow sensor – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). AUTODOC experts recommend:
- Сlear the trouble codes from the electronic control unit if necessary.
- Make sure that no dust or dirt gets into the air duct components and the throttle body.
- All work should be done with the engine stopped.
Replacement: mass air flow sensor – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Do not use excessive force when removing the part as this may damage it. - Step 4
Remove the air intake hoses. - Step 5
Clean the air filter cover and housing. - Step 6
Remove the air filter housing.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Do not use excessive force when removing the part as this may damage it. - Step 7
Detach the mass air flow sensor connector. - Step 8
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 9
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 10
Clean the mounting seat of the mass air flow sensor. - Step 11
Remove the microfibre towel from the throttle body. - Step 12
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 13
Remove the mass air flow sensor. - Step 14
Install a new mass air flow sensor. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Platform / Chassis (VF210) model
Popular maintenance tutorials for MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210)
Free download PDF
716.8 KB
Free download PDF870.4 KB
Free download PDF1.23 MB
Free download PDF962.56 KB
Free download PDF849.92 KB
Complete guides for changing the MAF sensor on different MERCEDES-BENZ E-CLASS models
Free download PDF1.29 MB
Free download PDF1.29 MB
Free download PDF860.16 KB
Free download PDF1.55 MB
Free download PDF1.28 MB
Free download PDF1.29 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Platform / Chassis (VF210)
View more
Why Is the Windscreen Washer Not Spraying? Solution
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
How to choose the right engine oil for your car | AUTODOC
How to get your motorcycle ready for spring
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.
SCAN ME