Important!

This replacement procedure can be used for:
RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi 90, RENAULT MODUS / GRAND MODUS (F/JP0_) 1.2 (JP0C, JP0K, FP0C, FP0K, FP0P, JP0P, JP0T), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.6 (JP0L, JP0V), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.6 (JP03, JP0B, JP0U, JP0Y, JP1G), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (FP0G, JP0G), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (FP0F, JP0F), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.4 (JP01, JP0J), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (JP0G, JP0H), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.2 (FP0C, FP0K, FP0P), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.2 16V (JP0W), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (JP02), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.2 (JP0S), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (FP0E, JP0E), RENAULT MODUS / GRAND MODUS (F/JP0_) 1.2 16V Hi-Flex, RENAULT MODUS / GRAND MODUS (F/JP0_) 1.5 dCi (FP0D, JP0D) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for MODUS / GRAND MODUS (F/JP0_) and other RENAULT models

Suspension arm

        Suspension arm for Modus / Grand Modus (F, JP) Diesel (88 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Petrol (75 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Petrol (88 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Petrol (112 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Diesel (68 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Diesel (86 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Petrol (98 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Diesel (106 hp)
      
        Suspension arm for Modus / Grand Modus (F, JP) Petrol (65 hp)

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). List of the tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Torque wrench
                      
                        Combination spanner #16
                      
                        Combination spanner #18
                      
                        Drive socket # 13 
                      
                        Drive socket # 16 
                      
                        Drive socket # E16 
                      
                        Drive socket # 18 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Tap wrench
                      
                        Hammer
                      
                        Flat chisel
                      
                        Crow bar
                      
                        Hydraulic transmission jack
                      
                        Wheel chock

Buy tools

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). AUTODOC recommends:

The replacement procedure is identical for the left and right lower control arms.
All work should be done with the engine stopped.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MODUS / GRAND MODUS (F/JP0_)
Step 5

Remove the wheel.
Step 6

Clean all joints of the arm. Use a wire brush. Use WD-40 spray.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). Tip:
After applying the spray, wait a few minutes.Wear protective goggles.
Step 7

Unscrew the subframe reinforcement bracket fasteners. Use a drive socket #13. Use a ratchet wrench.
Step 8

Support the subframe. Use a hydraulic transmission jack.
Step 9

Unscrew the subframe fastening. Use a drive socket #18. Use a ratchet wrench.
Step 10

Detach the front subframe crossmember.
Step 11

Remove the support from under the subframe.

AUTODOC recommends:
Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 12

Clean all joints of the arm. Use a wire brush. Use WD-40 spray.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). Tip from AUTODOC experts:
After applying the spray, wait a few minutes.Wear protective goggles.
Step 13

Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a tap wrench.
Step 14

Remove the fastening bolt.
Step 15

Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench.
Step 16

Remove the rear fastener of the control arm.
Step 17

Unscrew the front arm fastener. Use a combination spanner #18. Use a drive socket #E16. Use a tap wrench.

Step 18

Remove the front fastener of the control arm. Use a crowbar.

Step 19

Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
Step 20

Disconnect the ball joint from the steering knuckle.
Step 21

Remove the arm.
Step 22

Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
Step 23

Install a new arm.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). AUTODOC experts recommend:
During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
Step 24

Install the front fastener of the arm.
Step 25

Connect the ball joint to the steering knuckle.
Step 26

Install the fastening bolt.
Step 27

Screw the fasteners of the ball joint. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
Step 28

Install the rear fastener of the control arm.

Step 29

Screw the rear arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
Step 30

Screw the front arm fastener. Use a drive socket #18. Use a ratchet wrench.

Step 31

Support the subframe. Use a hydraulic transmission jack.
Step 32

Attach the front subframe crossmember.

Step 33

Screw in the subframe fasteners. Use a drive socket #18. Use a ratchet wrench.

Step 34

Remove the support from under the subframe.

AUTODOC recommends:
RENAULT MODUS / GRAND MODUS (F/JP0_) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
Step 35

Support the arm. Use a hydraulic transmission jack.
Step 36

Tighten the front fastener connecting the control arm to the subframe. Use a combination spanner #18. Use a drive socket #E16. Use a torque wrench. Tighten it to 70 Nm torque.
Step 37

Tighten the rear fastener connecting the arm to the body subframe. Use a combination spanner #18. Use a drive socket #18. Use a torque wrench. Tighten it to 105 Nm torque.
Step 38

Tighten the ball joint fastener. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 60 Nm torque.
Step 39

Remove the support from under the arm.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). AUTODOC experts recommend:
Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Step 40

Support the subframe. Use a hydraulic transmission jack.
Step 41

Unscrew the subframe fastening. Use a drive socket #18. Use a ratchet wrench.
Step 42

Screw in the subframe reinforcement bracket fasteners. Use a drive socket #13. Use a ratchet wrench.
Step 43

Tighten the subframe fastening. Use a drive socket #18. Use a torque wrench. Tighten it to 105 Nm torque.
Step 44

Tighten the subframe reinforcement bracket fasteners. Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.
Step 45

Remove the support from under the subframe.

Replacement: front lower arm – RENAULT MODUS / GRAND MODUS (F/JP0_). Professionals recommend:
Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Step 46

Treat all joints of the arm. Use copper grease.
Step 47

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 48

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
After applying the spray, wait a few minutes.
Step 49

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. RENAULT MODUS / GRAND MODUS (F/JP0_)
Step 50

Screw in the wheel bolts. Use wheel impact socket #17.
Step 51

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 105 nm torque.

Step 52

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Modus / Grand Modus (F, JP) model.

Browse tyres

How to change rear wheel bearing on RENAULT MODUS / GRAND MODUS (F/JP0_) – replacement guide

Free download PDF
2.11 MB
How to change front wheel bearing on RENAULT MODUS / GRAND MODUS (F/JP0_) – replacement guide

Free download PDF
4.01 MB
How to change track rod end on RENAULT Modus / Grand Modus (F, JP) – replacement guide

Free download PDF
1.64 MB
How to change front strut mount on RENAULT Modus / Grand Modus (F, JP) – replacement guide

Free download PDF
3.31 MB
How to change front anti roll bar links on RENAULT MODUS / GRAND MODUS (F/JP0_) – replacement guide

Free download PDF
1.12 MB
How to change rear brake pads on RENAULT MODUS / GRAND MODUS (F/JP0_) – replacement guide

Free download PDF
1.37 MB

How to change control arm on a car – replacement tutorial

Universal

Free download PDF
1.07 MB
How to change front lower arm on Renault Clio 3 – replacement guide

Free download PDF
2.57 MB
How to change front lower arm on Renault Clio 2 – replacement guide

Free download PDF
2.9 MB
How to change front lower arm on Renault Scenic 2 – replacement guide

Free download PDF
3.34 MB
How to change front lower arm on Renault Twingo C06 – replacement guide

Free download PDF
1.92 MB
How to change front lower arm on Renault Megane 2 – replacement guide

Free download PDF
3.3 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Important differences between car tools | AUTODOC tips

7K views

Published on: 16/12/2021
How to check your head gasket | AUTODOC

4K views

Published on: 03/12/2020
Top 5 tips to prevent car rust | AUTODOC tips

5K views

Published on: 27/07/2023
What to do if the belt squeals | AUTODOC tips

4K views

Published on: 04/03/2021