Disclaimer
How to change front lower arm on Renault Clio 3 – replacement guide
downloads:
19
Views:
723
Important!
This replacement procedure can be used for:
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport (CR0N, CR1P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport (CR0N, CR1P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
How to change front control arm on RENAULT CLIO 3 [TUTORIAL AUTODOC]

All the parts you need to replace – Control Arm for Clio III Hatchback (BR0/1, CR0/1) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Drive socket # 13
Drive socket # 16
Drive socket # E16
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hammer
Flat chisel
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – Renault Clio 3. AUTODOC recommends:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – Renault Clio 3. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Renault Clio 3 - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – Renault Clio 3. Tip:After applying the spray, wait a few minutes.Wear protective goggles. - Step 7
Unscrew the subframe reinforcement bracket fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Support the subframe. Use a hydraulic transmission jack. - Step 9
Unscrew the subframe fastening. Use a drive socket #18. Use a ratchet wrench. - Step 10
Detach the front subframe crossmember. - Step 11Remove the support from under the subframe.AUTODOC recommends:Replacement: front lower arm – Renault Clio 3. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.Step 12
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – Renault Clio 3. Tip from AUTODOC experts:After applying the spray, wait a few minutes.Wear protective goggles. - Step 13
Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a tap wrench. - Step 14
Remove the fastening bolt. - Step 15
Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench. - Step 16
Remove the rear fastener of the control arm. - Step 17Unscrew the front arm fastener. Use a combination spanner #18. Use a drive socket #E16. Use a tap wrench.Step 18Remove the front fastener of the control arm. Use a crowbar.Step 19
Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer. - Step 20
Disconnect the ball joint from the steering knuckle. - Step 21
Remove the arm. - Step 22
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 23
Install a new arm.Replacement: front lower arm – Renault Clio 3. AUTODOC experts recommend:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover. - Step 24
Install the front fastener of the arm. - Step 25
Connect the ball joint to the steering knuckle. - Step 26
Install the fastening bolt. - Step 27
Screw the fasteners of the ball joint. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 28Install the rear fastener of the control arm.Step 29
Screw the rear arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 30Screw the front arm fastener. Use a drive socket #18. Use a ratchet wrench.Step 31
Support the subframe. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio III Hatchback (BR0/1, CR0/1) model
Popular maintenance tutorials for Renault Clio 3
Complete guides for changing the Control arm on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Clio III Hatchback (BR0/1, CR0/1)
View more
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
How to restore a steering wheel | AUTODOC tips
Cold starts | 5 mistakes that wreck your car
How to choose a used car and not regret it
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




































